Connecting The Power - Samsung LC49HG90DMNXZA User Manual

― To detect and start a USB device faster, connect the device to the USB 3.0 port on the product. The read/write
rate will be affected by the USB device and your PC.
― The product does not support media play. If you need to play a file in your USB device, please connect the
product as a Hub to your PC and play the file on your PC.
― For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.
― With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
― For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
― The super charging can only be provided through port
specification, can support a maximum current of 1.5A. The actual current value depends on the device
to be charged.
If the current is too high or an exception occurs, the over-current protection will be triggered. This is a normal
setting of the product.
― USB devices requiring high current may not be supported.
and can support a maximum current of 1.5A.
― The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered
off.
― Charging your USB device is not possible if the power cable is disconnected from the power socket.
― The USB device needs to be purchased separately.
. According to the USB 3.0 battery charging
can support a maximum current of 1.0A,

Connecting the Power

POWER IN
To use the product, connect the power cable to a power outlet and the POWER IN port on the product.
― The input voltage is switched automatically.
25