Worx Professional WU640 Manual page 6

Accessories
• Paper hole punch
• Dust bag
• Sanding papers (120#)
•
Vacuum adaptor
If using sanding paper without dust holes, you must use the paper
punch to make holes.
Use 1/3 sheet sanding paper of the following size:
Sanding paper size:
93*230mm for no hook & loop (Clamp only)
93*182mm for hook & loop
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
Additional safety points for your
finishing sander
1pc
1
Remove the plug from the socket before carrying out any
1pc
adjustment, servicing or maintenance.
1pc
2
Fully unwind cable drum extensions to avoid potential overheating.
1pc
3
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
4
Ensure your mains supply voltage is same as indicated on the
rating plate.
5
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
6 Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
7
After long working periods external metal parts and accessories
could be hot.
8
Wear eye protection when operating this tool.
9
If possible, ensure the workpiece is firmly clamped to prevent
movement.
10
Your finishing sander is a hand held tool, do not clamp your
finishing sander.
11
Before sanding, check the area is free of nails, screws, etc.
12
Never stop the finishing sander by applying a force to the
baseplate.
13
Only use paper in good condition. Do not use torn or worn paper.
14
Do not sand material containing asbestos due to a health risk.
15
Do not sand lead based paint due to the risk of lead poisoning.
16
Do not eat or drink in the working area of the sander.
6