Preparation; Basic Operations - Toto WASHLET TCF6632G NW1 Series Instruction Manual

Preparation

1. Turn on the power
1
Insert the power plug.
Switch the breaker on the
distribution board to ON.
(Electrical box type, Concealed power
connection type)
 The wand extends and then retracts.
2
Check that the POWER LED
on the main display is lit up.
Lit
14
Using the Product for the First Time
2. Open the shutoff valve
1
Fully open the shutoff valve.
Shutoff
valve
[For shutoff valve
(Concealed power connection type)]
Shutoff
valve
Note
●If the tank is empty it will take some minutes until
water is discharged from the nozzle.

Basic Operations

[REAR]
[SOFT REAR]
Cleansing
Washes your rear with mild water
pressure.
Drying
Stopping
[STOP]
● Functions that
[PRESSURE]
operate when a button
is pressed during You can adjust the water pressure as
"REAR", "SOFT REAR" desired to 5 different levels.
● The PRESSURE LEDs lights up
or "FRONT" cleansing.
when you sit on the toilet seat.
Note
• Sitting back on the toilet seat makes it easier to adjust the wand position and to reduce splashing.
For your information
● Water may sometimes come out from around the wand while water is warmed up or when it expands in the warm water tank.
● As warm water tank is used as hot water system, the temperature of warm water may become lower if it is continuously consumed.
Cleanses your rear.
[OSCILLATING]
When you press this button
again during use, the wand
[FRONT]
moves back and forth to
Serves as a bidet for ladies. wash your rear thoroughly.
[DRYER]
Dries your rear.
Temperature adjustment button
(Page 18)
Indication
• Adjust temperatures
LED
[POSITION]
You can adjust the washing position as desired to
5 different points.
● The washing position returns to the standard
position (3rd point) when you stand up from the
toilet seat.
15