Gap Between The Main Unit And The Toilet Lid; Deodorizing Filter; Wand - Toto WASHLET TCF6632G NW1 Series Instruction Manual

Maintenance

Gap between the Main Unit and the Toilet Lid

The toilet lid can be removed for thorough
cleaning.
Unplug the power
1
plug.
Switch the breaker on
the distribution board to
OFF.
(Electrical box type, Concealed
power connection type)
Remove the toilet lid.
2
:Pull the left side outward.
: Disconnect the hinge from the recess
and pull up.
:Disconnect the right side.
Wipe with a soft cloth that
3
has been soaked in water
and wrung-out thoroughly.
Reinstall the toilet lid.
4
:Join the pin and the hinge on the right side.
Slightly tilt the toilet lid to the front.
:While pulling out the left side,
:Mount by joining the hinge with the recess.
* Be careful not to pinch your fi ngers.
5 Open and close the toilet lid to check the mounting, and then mount
the main unit.
Insert the power plug.
6
Switch the breaker on the distribution board to ON.
(Electrical box type, Concealed power connection type)
 The POWER LED lights up.
24
(Approximately once a month)
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
Removing and Reinstalling
Hold with both
hands
B
C
A
D
E Recess
Pin Hinge
Hinge
Deodorizing fi lter
(Approximately once a month)
Unplug the power plug.
1
Switch the breaker on the
distribution board to OFF.
(Electrical box type, Concealed power
connection type)
Remove the deodorizing fi lter.
2
 Hold the knob and pull outward.
 Do not pull with undue force.
(May cause damage or malfunctions)
Deodorizing fi lter
Knob
Clean with a tool such as a
3
toothbrush.
 When washing with water, dry off all water
before mounting.
Toothbrush
Mount the deodorizing fi lter.
4
 Push fi rmly until a click sound is heard.
Insert the power plug.
5
Switch the breaker on the
distribution board to ON.
(Electrical box type, Concealed power
connection type)
 The POWER LED lights up.

Wand

(Approximately once a month)
Wand cleaning <If you notice dirt>
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Press .
 The wand extends.
Wipe with a soft cloth that
2
has been soaked in water.
 Do not pull, push or press the wand with
excessive force.
(May cause damage or malfunction.)
3
Press .
 The wand retracts.
 Water comes out from around the wand.
25 25