Changing Settings - Toto WASHLET TCF6632G NW1 Series Instruction Manual

Changing Settings

To change the settings,
check that all LEDs on the
control panel are flashing!
AUTO FUNCTIONS CLEANING
Note
• If you do not press a next button within about 60 seconds after the LED fl ashes, the fl ashing LED will be disabled.
If you fail to complete the setting, redo from the beginning.
How to set
1
Press until all LEDs on
the control panel start fl ashing
(about 10 seconds)
28
Setting List
SEAT button
FRONT button
WAND CLEANING button
Setting type
PRE-MIST
DEODORIZER
Set whether or not to spray mist in
the toilet bowl automatically
PRE-MIST
Set whether or not to deodorize
automatically
DEODORIZER
All LEDs on the control panel flash.
Press about
10 seconds
or longer
  Set whether or not to spray mist in the toilet bowl automatically
  Set whether or not to deodorize automatically
Press
2
The setting changes each time the button is pressed
and
ON
at the
Flickering
(Orenge)
same time.
2
The setting changes each time the button is pressed
Press
ON
.
Flickering
(Green)
Settings cannot be changed
unless all LEDs flash
Available Settings
Bold: Initial settings
ON/OFF
ON/OFF
OFF
OFF
3
OFF
<Settings complete>
OFF
Press
.
29