Download Print this page
SereneLife SLHT49 Assembly Instructions
SereneLife SLHT49 Assembly Instructions

SereneLife SLHT49 Assembly Instructions

Care taker ground hunting blind patented dual-floor kick-outs, water repellent and uv treated, includes carrying bag

Advertisement

Quick Links

SLHT49
Care Taker Ground Hunting Blind
Patented Dual-floor Kick-Outs, Water Repellent and UV Treated,
Includes Carrying Bag
WARNING:
• FOR YOUR SAFETY BE SURE TO READ ALL INSTRUCTIONS CAREFULLY.
• THIS HUNTING BLIND USES FIRE RESISTENT MATERIAL. THIS MATERIAL IS NOT FLAME PROOF.
• DO NOT ALLOW ANY HEAT OR OPEN FLAMES TO COME IN CONTACT WITH THE MATERIAL OF THIS HUNTING BLIND.
• DO NOT USE HEATER IN BLIND. UNVENTED FUMES CAN CAUSE SICKNESS OR DEATH.
• DO NOT SHOOT FIREARM THOUGH THE SHOOT THROUGH SCREENS. THE MUZZLE FLASH COULD IGNITE THE
SCREEN MATERIAL.
• DO NOT USE EXPANDABLE BROADHEADS WITH SHOOT-THROUGH SCREENS. THE BLADES MAY OPEN PREMATURELY.
USE FIXED BLADE BROADHEADS ONLY
• DO NOT ALLOW CHILDREN TO PLAY WITH THIS BLIND WITHOUT ADULT SUPERVISION.
• NEVER COVER YOUR FACE WITH THE BLIND MATERIAL, IT CAN CAUSE SUFFOCATION AND DEATH.
• REMOVE ALL GROUND STAKES BEFORE ATTEMPTING TO FOLD UP BLIND. GROUND STAKES MAY TEAR THE BLIND OR
CARRYING CASE.
SETUP:
STEP 1: Unpack and locate hubs
Remove the blind from carrying case and lay it on the
ground. Locate hubs.
Carrying
case
Wall hubs
STEP 3: Push out roof
Locate the hub for the roof in the center of the hubs. Be
sure hubs for walls not opened are close together. While
holding hub of wall already opened in one hand, rmly
push the roof hub outward with your other hand until it
pops open. Swing wall overhead and remain inside blind.
(inside sideview)
www.SereneLifeHome.com
Zippered pouch
Wall hubs
Roof hub
(center)
Swing nished wall
over head and stay
inside
Push out roof hub
from inside
STEP 2: Push out wall
Locate any one of the four wall hubs around the roof hub
in center. Hold the hub in one hand and place your foot
on the other hubs. With your other hand, grab the center
stake loop between the poles at the edge of the fabric.
Push the hub out rmly until the wall pops open.
Stake loop
STEP 4: Push out remaining walls
Now pop out the remaining three walls by rmly pushing
the hubs outward from the inside of the blind.
(inside view)
Wall hub
Push
Step

Advertisement

loading
Need help?

Need help?

Do you have a question about the SLHT49 and is the answer not in the manual?

Questions and answers

Summary of Contents for SereneLife SLHT49

  • Page 1 SLHT49 Care Taker Ground Hunting Blind Patented Dual-floor Kick-Outs, Water Repellent and UV Treated, Includes Carrying Bag WARNING: • FOR YOUR SAFETY BE SURE TO READ ALL INSTRUCTIONS CAREFULLY. • THIS HUNTING BLIND USES FIRE RESISTENT MATERIAL. THIS MATERIAL IS NOT FLAME PROOF.
  • Page 2 STEP 5: Connect tie-down cord STEP 6: Fasten ground stakes For windy conditions it is recommended that you use the Poke the ground stakes through the loops around the adjustable tie-down cords and stakes to secure the blind. outside edge of blind then press then into the ground. Loop tie-down cord through buckle as shown in diagram.
  • Page 3 STORAGE • Blind must never be rolled-up or packed while damp, as mildew will form within a few days. • Allow blind to completely dry before rolling and storing. • Mesh for Shooting window • Mesh for Viewing window • Carrying bag •...
  • Page 4 FEATURES: • Shoot-Through Mesh with Gun Port • Durashell Plus • Shadow Guard • Easy to Open/Close • Care Taker Ground Blind with One Door and Three Large Windows • Tension-relief Zipper Design • Comfortably Accommodates Two Hunters • Easy to Transport and Deploy in a Variety of Environments •...