How To Set Shut Down Time After Ue - LG FH0C7FD3S Owner's Manual

26. How to set shut down time after UE

Unbalance Error (UE) occurs when washer cannot balance the load within the selected drop counts.
can be used to set the time for maintaining the UE status before shutting down the cycle.
Enter setup mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display default shut down time.
Press 75°C (167°F) or the 60°C (140°F) button to select
time between 0~10.
(0 : Permanent standby, 1~10 : Shut down after
selected time)
 To restart after Permanent standby, redistribute load
and press Start button.
Press the Start button.
The machine sets up the shut down time, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
PrOGrAMMiNG MOdE - SETUP MOdE
Button
59
Display