LG FH0C7FD3S Owner's Manual

LG FH0C7FD3S Owner's Manual

Commercial washer
Table of Contents

Advertisement

Quick Links

SEC.
WORK
BRAND
01
LG
<BACK>
1
Owners manual 내용 현실화
EAGH200059
2017.02.02
2
Owners manual 내용 현실화
EAGH400721
2017.04.28
2017.06.16
3
Owners manual 내용 현실화
EAGH600541
4
REV. NO.
REVISION DESCRIPTION
REF. NO.
DATE
기호
변경 사항
시방 번호
년/월/일
MODEL
P/NO.
EXTERIER INTERIER
FH0C7FD3S
MFL67658553
<FRONT>
P/NO. 다
148
148
김영관
김재문
5
김영관
김재문
6
김영관
김재문
7
8
PREPARED
APPROVED
REV. NO.
REVISION DESCRIPTION
시방자
승인자
기호
변경 사항
PRINTING DEGREE
LG MODEL 명
1
1
FH0C7FD3S
<< 주기 >>
1. 재질 : 모조지 80g
2. 인쇄작업
1) G/S(LG) BRAND(FIG1) : * 표지 - 1도 : LG RED PANTONE #207
2) OEM BRAND(FIG2) : * 표지 - 1도 : BLACK
3. 문자의 크기 및 형상은 주어진 FILM에 준한다.
4. 책자의 크기는 일반적 규격(국판)에 준한다.
5. 양산 전에 설계 한도를 득할 것.
6. 유해물질 관리기준
: 본 부품에 금지물질이 포함되지 않도록 하고, 상세 내용은 LG(63)-A-5501-34를
만족할 것.
<< NOTES >>
1. Material : Vellum paper
2. Print work
1) G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207
2) OEM BRAND(FIG2) : * Cover - First color : Black
3. Printing, text size and line are based on LG design film.
4. Size will Follow the standard.
5. Before product controlled by criteria sample.
6. Standard of supervision for hazardous material
: The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)
and details should comply with LG standard of LG(63)-A-5501-34.
TRIG.
MODELING
DESIGNED
LG 전자
LG Electronics Inc.
REF. NO.
DATE
PREPARED
APPROVED
시방 번호
년/월/일
시방자
승인자
PAGE
BUYER
REMARK
Appro
156
FH0C7FD3S.ASSQEEU
- 2도 : LG GRAY PANTONE #430
* 내지 - 1도 : BLACK
* 내지 - 1도 : BLACK
- Second color : LG GRAY PANTONE #430
* Inside - First color : Black
* Inside - First color : Black
SCALE 1
UNIT
mm
1
T
REVIEWED
CHECKED APPROVED
I
T
김 영 관
윤 형 구
김 재 문
L
E
17.01.02
17.01.04
17.01.04
RELATED DWG.
(주)
DWG.
No.
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
DR COMPLETED
PDF
도면 DR 완료
ILLUSTRATOR
완료일 :
MANUAL,OWNER'S
TITAN-C (W) HEATER
1/1
MFL67658553

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FH0C7FD3S and is the answer not in the manual?

Questions and answers

Summary of Contents for LG FH0C7FD3S

  • Page 1 << NOTES >> 1. Material : Vellum paper 2. Print work 1) G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207 - Second color : LG GRAY PANTONE #430 * Inside - First color : Black...
  • Page 2 Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference. MODEL FH0C7FD3S www.lg.com Copyright © 2017 LG Electronics Inc. All rights reserved. MFL67658553...
  • Page 3: Product Features

    PRODUCT FEATURES PRODUCT FEATURES DIRECT DRIVE SYSTEM The advanced brushless DC motor drives the drum directly without using a belt and pulley. TILTED DRUM AND EXTRA LARGE DOOR OPENING The tilted drum and extra large opening make it possible to load and unload clothing more easily. ULTRA CAPACITY The larger drum enables more tumbling action and greater centrifugal force, but also less tangling and wrinkling of the laundry.
  • Page 4: Important Safety Instructions

    3. You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/ recycling...
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack...
  • Page 6: Grounding Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. BASIC SAFETY PRECAUTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic...
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR INSTALLATION WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic...
  • Page 8 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL WARNING To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic...
  • Page 9 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL WARNING To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic...
  • Page 10: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS - 9-5. Twin spray setup PRODUCT FEATURES - 10. How to enter the - 10-1. Pause function setup IMPORTANT SAFETY INSTRUCTIONS - 11. How to enter the special price day - 11-1. How to change to Sunday BASIC SAFETY PRECAUTIONS - 12.
  • Page 11: Parts And Accessories

    PArTS ANd ACCESSOriES PARTS AND ACCESSORIES Parts detergent dispenser Water inlets drawer Control panel Shipping Power bolts cord door door seal Magnet door Plunger (see page 2) Accessories Caps (4) Hot and Cold Non-skid pads (for covering shipping bolt holes) Water Hoses Wrench Hole cap (5)
  • Page 12: Control Panel Features

    PArTS ANd ACCESSOriES CONTROL PANEL FEATURES OPL type (FH0C7FD3S) Optional function button 1. Display LED 4. Start/Pause button 2. Cycle button 5. Status LED 3. Optional function button 6. Emergency stop button How to Emergency stop button Press emergency stop button in emergency NOTE situation.
  • Page 13 PArTS ANd ACCESSOriES Status LED Display LED Cycle button Start/Pause button Optional function button Display LED Optional function button The display shows the vend price and Custom PGM: Customized cycle program can remaining time and programming options. be used. Only available in OPL type. Press and hold the Cold button for 3 seconds, Error codes are also displayed here.
  • Page 14: Installation Instructions

    iNSTALLATiON iNSTrUCTiONS INSTALLATION INSTRUCTIONS Checking and choosing the Installing on a floor proper location 22,5” (57 cm) Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing.
  • Page 15: Unpacking And Removing Shipping Bolts

    iNSTALLATiON iNSTrUCTiONS Unpacking and removing shipping bolts NOTE When removing the washer from the carton base, be sure to remove the foam drum • Save the bolt assemblies for future use. To support in the middle of the carton base. prevent damage to internal components, If you must lay the washer down to remove the DO NOT transport the washer without...
  • Page 16: Connecting The Water Lines

    Do not reuse old hoses. Use only the inlet hoses provided with the • Do not overtighten. Damage to the cou- washer. LG does not recommend the use pling can result. of aftermarket hoses. • Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
  • Page 17: Connecting The Drain Line

    INSTALLATION INSTRUCTIONS Connecting the drain line Secure the drain hose in place to prevent • Make sure that the hose is not twisted. moving and leaking. NOTE • The drain hose should be properly secured. Failure to properly secure the drain hose can result in flooding and malfunction.
  • Page 18: Leveling The Washing Machine

    iNSTALLATiON iNSTrUCTiONS Leveling the washing machine Check the washing machine’s level again. - Push or rock the top edges of the washing machine gently to make sure that the The washer tub of your new washing machine washing machine does not rock. spins at very high speeds.
  • Page 19: Preparation

    PrEPArATiON PREPARATION Precautions for fabric care before wash cycle Read and observe the following to prevent shrinkage or damage to clothes. Check all pockets to make sure that they are Brush heavy soil, dust, or hair off fabrics empty. before washing. -Items such as clips, matches, pens, coins, - Laundry may not wash clean if there is dirt and keys can damage both your washer and...
  • Page 20: Fabric Care Labels

    PrEPArATiON Fabric care labels Sorting laundry Most articles of clothing feature fabric care It is recommended that you sort laundry into labels that include instructions for proper care. similar loads that are washable in the same cycle. Category Label Directions Refer to the following chart for sorting clothes Hand Wash Colors...
  • Page 21: Using Detergent/Fabric Softener

    PrEPArATiON Using detergent/fabric softener Recommended detergent About the dispenser Use HE (High-Efficiency) detergent for front- The automatic dispenser consists of three loading washing machines. HE detergents compartments which hold: dissolve more efficiently and produce • Liquid chlorine bleach. fewer suds to ensure efficient washing and •...
  • Page 22: Loading The Dispenser

    PrEPArATiON Loading the dispenser Main Wash Detergent Compartment Liquid Bleach Compartment This compartment holds liquid chlorine bleach, This compartment holds laundry detergent which will be dispensed automatically at the for the main wash cycle, which is added to the load at the beginning of the cycle. Always proper time during the wash cycle.
  • Page 23: Operating Your Washer

    OPErATiNG YOUr WASHEr OPERATING YOUR WASHER 1. Ready mode 3. Select the cycle 1) Coin / Card type Press the desired button and press the start button. – The cycle LEDs are lit at the same time, The display LED will show the remaining when the price of cycles are equal.
  • Page 24: Programming Mode

    PrOGrAMMiNG MOdE PROGRAMMING MODE : You can check machine information or change setting on “Program setup”, “Collect Information Data”, ”Diagnostic Test”. How to enter "Programming mode" How to use button You can enter programming mode only for Idle You can change Washer vend price, cycle time state and pause state.
  • Page 25 PrOGrAMMiNG MOdE Card type Algorithm flow chart shows how to control programming mode. Before program set, check the structure of programming mode. 1. Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instructions). 2.
  • Page 26 PrOGrAMMiNG MOdE Coin type Algorithm flow chart shows how to control programming mode. Before program set, check the structure of programming mode. 1. Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instructions). 2.
  • Page 27 PrOGrAMMiNG MOdE OPL type Algorithm flow chart shows how to control the programming mode. Before program set, check the structure of the programming mode. The method of entering set up mode. 1) Push the Hot & Cold button at the same time. 2) Push the Warm button 3 times.
  • Page 28: How To Change Regular Price

    PrOGrAMMiNG MOdE - SETUP MOdE Setup Mode : (display) You can change washer vend price, cycle time, and cycle parameters, etc. Entering set up mode - Coin type – Turn on/off toggle switch. - Coin/OPL type 1) Push the 90°C (194°F) & 60°C (140°F) button at the same time. 2) Push the 75°C (167°F) button 3 times.
  • Page 29: How To Change Regular Cold Price

    PrOGrAMMiNG MOdE - SETUP MOdE 2. How to change regular cold price. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 30: How To Change Regular 30˚C(86˚F)/40˚C(104˚F)/60˚C(140˚F) Price

    PrOGrAMMiNG MOdE - SETUP MOdE 3. How to change regular 30˚C(86˚F)/40˚C(104˚F)/60˚C(140˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 31: How To Change Regular 75˚C(167˚F)/90˚C(194˚F) Price

    PrOGrAMMiNG MOdE - SETUP MOdE 4. How to change regular 75˚C(167˚F)/90˚C(194˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 32: How To Change Special Price

    PrOGrAMMiNG MOdE - SETUP MOdE 5. How to change special price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 33: How To Change Special Cold Price

    PrOGrAMMiNG MOdE - SETUP MOdE 6. How to change special cold price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 34: How To Change Special 30˚C(86˚F)/40˚C(104˚F)/60˚C(140˚F) Price

    PrOGrAMMiNG MOdE - SETUP MOdE 7. How to change special 30˚C(86˚F)/40˚C(104˚F)/60˚C(140˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 35: How To Change Special 75˚C(167˚F)/90˚C(194˚F) Price

    PrOGrAMMiNG MOdE - SETUP MOdE 8. How to change special 75˚C(167˚F)/90˚C(194˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 36: How To Enter The 36 - 9-1. Special Price Day Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 9. How to enter the Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 37 PrOGrAMMiNG MOdE - SETUP MOdE 9-1. Special price day setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 38: Non-Stop Rinse

    PrOGrAMMiNG MOdE - SETUP MOdE 9-2. Non-stop rinse Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 39: Vend Type Setup - Coin Type Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 9-3. vend type setup - coin type setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 40: Pre-Wash Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 9-4. Pre-wash setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 41: Twin Spray Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 9-5. Twin spray setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 42: How To Enter The 42 - 10-1. Pause Function Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 10. How to enter the Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 43 PrOGrAMMiNG MOdE - SETUP MOdE 10-1. Pause function setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 44: How To Enter The Special Price Day

    PrOGrAMMiNG MOdE - SETUP MOdE 11. How to enter the special price day Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 45: How To Change To Sunday

    PrOGrAMMiNG MOdE - SETUP MOdE 11-1. How to change to Sunday Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 46: Special Price Beginning Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 12. Special price beginning time setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 47: Special Price Ending Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 13. Special price ending time setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 48: Prewash Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 14. Prewash time setup Prewash time setup can be used to set the time for prewash. Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button. Press the 75°C (167°F) or the 60°C (140°F)button until appears in the display.
  • Page 49: Washing Time Set Up

    PrOGrAMMiNG MOdE - SETUP MOdE 15. Washing time set up Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 50: Rinsing Times Per Cycle

    PrOGrAMMiNG MOdE - SETUP MOdE 16. Rinsing times per cycle Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 51: Rinsing Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 17. Rinsing time setup Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 52 PrOGrAMMiNG MOdE - SETUP MOdE 18. Top spin speed – final spin time depends on RPM Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 53: Value Of Coin

    PrOGrAMMiNG MOdE - SETUP MOdE 19. value of coin 1 Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 54: Value Of Coin

    PrOGrAMMiNG MOdE - SETUP MOdE 20. value of coin 2 Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 55: Penny Increment Pricing Offset

    PrOGrAMMiNG MOdE - SETUP MOdE 21. Penny increment pricing offset (Use only for Card type) This represents the cent increment price offset used when debit card is setup. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 56: How To Change The Water Level

    PrOGrAMMiNG MOdE - SETUP MOdE 22. How to change the water level You can change the water level by selecting options. indicate water level 23,5 [KHz] (cold course : 23,5 KHz) indicate water lever 23,3 [KHz] (cold course : 23,3 KHz) indicate water lever 23,0 [KHz] (cold course : 23,0 KHz) Button Display...
  • Page 57: Beep Volume

    PrOGrAMMiNG MOdE - SETUP MOdE 23. Beep volume Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 58: Time To Keep The Coin

    PrOGrAMMiNG MOdE - SETUP MOdE 24. Time to keep the coin (Use only for coin type) Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 59: How To Setting Drop Count

    PrOGrAMMiNG MOdE - SETUP MOdE 25. How to setting drop count Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 60: How To Set Shut Down Time After Ue

    PrOGrAMMiNG MOdE - SETUP MOdE 26. How to set shut down time after UE Unbalance Error (UE) occurs when washer cannot balance the load within the selected drop counts. can be used to set the time for maintaining the UE status before shutting down the cycle. Button Display Enter setup mode.
  • Page 61: How To Set Rinse Spin Enable

    PrOGrAMMiNG MOdE - SETUP MOdE 27. How to set rinse spin enable Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 62: How To Set Drop Count For Rinse Spin

    PrOGrAMMiNG MOdE - SETUP MOdE 28. How to set drop count for rinse spin can be used to set the number of drop counts for each rinse spin. Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 63: How To Set Auto Dosing

    PrOGrAMMiNG MOdE - SETUP MOdE 29. How to set auto dosing Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 64: How To Enter The 64 - 31. How To Set Custom Program

    PrOGrAMMiNG MOdE - SETUP MOdE 30. How to enter the Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 65 PrOGrAMMiNG MOdE - SETUP MOdE 31. How to set custom program Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.
  • Page 66: Programming Mode - Test Mode

    PrOGrAMMiNG MOdE - TEST MOdE PROGRAMMING MODE - TEST MODE Diagnostic tests: (display) This program has been added for testing the washer and detecting errors. Entering the test mode Data Name Button Display Description Entering 1. Entering Insert service card (card type), turn on/off toggle switch the test programming mode (Coin type).
  • Page 67: Factory Reset

    PrOGrAMMiNG MOdE - TEST MOdE 2. Factory reset - After factory reset, machine information is changed to the default value. Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display.
  • Page 68: Time Setup

    PrOGrAMMiNG MOdE - TEST MOdE 3. Time setup Button Display Entering set up Press the 75°C (167°F) or the 60°C (140°F) button until mode. appears in the display. You will see LqC1 Press the Start button. The display will cycle through 2000 --> 0101 --> Sat --> 0000 repeatedly.
  • Page 69: Courtesy Cycle

    PrOGrAMMiNG MOdE - TEST MOdE 4. Courtesy cycle A courtesy cycle is like a complimentary cycle given to the customer when the washer goes out of order after the customer has made the payment to wash clothes. Button Display Entering set up mode.
  • Page 70: Cycle Kill

    PrOGrAMMiNG MOdE - TEST MOdE 5. Cycle Kill Coin / OPL type Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display. Press the Start button. Press the 75°C (167°F) button until appears in the display.
  • Page 71: Password

    PrOGrAMMiNG MOdE - TEST MOdE 6. Password - How to change the password. Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display. Press the Start button. Press the 75°C (167°F) button until appears in the display.
  • Page 72: Tub Clean

    PrOGrAMMiNG MOdE - TEST MOdE 7. Tub clean - To clean up the tub, please run the TUB CLEAN cycle. Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display.
  • Page 73 PrOGrAMMiNG MOdE - COLLECT MOdE PROGRAMMING MODE - COLLECT MODE Collect information data : (display) The washer collects the usage data so that the owner can check various information like number of various cycles used, how many times coins used, etc. Entering the collect mode Data Name Button...
  • Page 74: Programming Mode - Collect Mode

    PrOGrAMMiNG MOdE - COLLECT MOdE Collect Mode Data lists No. Abbreviation Meaning Description rgPr Regular Price 0,00 ~ 10,00 rgCP Regular Cold Price 0,00 ~ 10,00 rgrP Regular 40˚C(104˚F)/60˚C(140˚F) Price 0,00 ~ 10,00 rgHP Regular 75˚C(167˚F)/90˚C(194˚F) Price 0,00 ~ 10,00 dELC Dryer Moisture Sense 0: disable...
  • Page 75: Maintenance

    MAiNTENANCE MAINTENANCE Care after wash Cleaning the Dispenser 1. The dispenser should be cleaned periodically After the cycle is finished, wipe the door and the to remove buildup from detergent and other inside of the door seal to remove any moisture. laundry products.
  • Page 76: Cleaning The Detergent Box

    MAiNTENANCE Cleaning the detergent box In order to clean detergent box only, detach Pull out the water inlet filter. it from the machine it by pressing arrow as shown in below image. inlet Filter Remove foreign objects from the water filter inlet.
  • Page 77: Clean The Door Seal

    MAiNTENANCE NOTE Clean the door seal Distributer & Service Clean the door seal once a month to prevent build-up of dirt in the door seal. BIJELI SVIJET d.o.o. (Croatia) Wear rubber gloves and protective goggles. Kranjceviceva 50, Zagreb, Croatia Dilute 3/4 cup (177 ml) of liquid chlorine Tel.
  • Page 78: Error Mode

    ErrOr MOdE ERROR MODE Meaning of Error Codes that LED displays during occurrence of problem. Problem Possible Cause Solution • Water supply is not adequate in area. Check another tap in the house. • Water supply taps are not completely open. Fully open tap.
  • Page 79: Power Fail Recovery

    POWEr FAiL rECOVErY & dEFAULT WASHEr SETTiNGS & SPECiFiCATiONS POWER FAIL RECOvERY In case of power failure, the machine stops running but the time display remains on, showing the time just before power failure. DEFAULT WASHER SETTINGS Default Settings Default Wash Time (Minutes) 31 Minutes Rinse Time (Minutes)
  • Page 80: Specifications

    POWEr FAiL rECOVErY & dEFAULT WASHEr SETTiNGS & SPECiFiCATiONS SPECIFICATIONS Model Name Front-loading Washing Machine Power supply 220-240V~, 50Hz 73,7 cm (W) X 81,4 cm (D) X 103,6 cm (H), 137 cm (D with door open) Size 29”(W) X 32”(D) X 40,8”(H), 53”(D with door open) Weight 101,2 kg (223,1 lbs)
  • Page 81 MEMO MEMO...
  • Page 82 TABLE OF CONTENTS TABLE OF CONTENTS 117 - 12-1. Pause function setup PArTS ANd ACCESSOriES 118 - 13. How to enter the special price day Parts 119 - 13-1. How to change to Sunday Accessories 120 - 14. Special price beginning time setup 121 - 15.
  • Page 83: Parts And Accessories

    PArTS ANd ACCESSOriES PArTS ANd ACCESSOriES Parts detergent dispenser Water inlets drawer Control panel Shipping Power bolts cord door door seal Magnet door Plunger (see page 2) Accessories Caps (4) Hot and Cold Non-skid pads (for covering shipping bolt holes) Water Hoses Wrench Hole cap (5)
  • Page 84: Control Panel Features

    PArTS ANd ACCESSOriES CONTrOL PANEL FEATUrES OPL type Optional function button 1. Display LED 4. Start/Pause button 2. Cycle button 5. Status LED 3. Optional function button 6. Emergency stop button how to Emergency stop button Press emergency stop button in emergency NOTE situation.
  • Page 85 PArTS ANd ACCESSOriES Status LED Display LED Cycle button Start/Pause button Optional function button display LEd Optional function button Add Super Wash: Wash time or rinse cycle can The display shows the vend price and remaining time and programming options. be added when additional coin is inserted or a Error codes are also displayed here.
  • Page 86: Installation Instructions

    iNSTALLATiON iNSTrUCTiONS iNSTALLATiON iNSTrUCTiONS Checking and choosing the installing on a floor proper location 22,5” (57 cm) Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing.
  • Page 87: Unpacking And Removing Shipping Bolts

    iNSTALLATiON iNSTrUCTiONS Unpacking and removing shipping bolts NOTE When removing the washer from the carton base, be sure to remove the foam drum • Save the bolt assemblies for future use. support in the middle of the carton base. To prevent damage to internal If you must lay the washer down to remove the components, DO NOT transport the base packaging materials, always lay it carefully...
  • Page 88: Connecting The Water Lines

    Do not reuse old hoses. Use only the inlet hoses provided with the • Do not overtighten. Damage to the cou- washer. LG does not recommend the use pling can result. of aftermarket hoses. • Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
  • Page 89: Connecting The Drain Line

    iNSTALLATiON iNSTrUCTiONS Connecting the drain line Secure the drain hose in place to prevent • Make sure that the hose is not twisted. moving and leaking. NOTE • The drain hose should be properly secured. Failure to properly secure the drain hose can result in flooding and malfunction.
  • Page 90: Leveling The Washing Machine

    iNSTALLATiON iNSTrUCTiONS Leveling the washing machine Check the washing machine’s level again. - Push or rock the top edges of the washing The washer tub of your new washing machine machine gently to make sure that the spins at very high speeds. To minimize washing machine does not rock.
  • Page 91: Preparation

    PrEPArATiON PrEPArATiON Precautions for fabric care before wash cycle Read and observe the following to prevent shrinkage or damage to clothes. Check all pockets to make sure that they are Check if there are any other foreign objects empty. in the door seal and take extra care that - Items such as clips, matches, pens, coins, clothes do not get caught there.
  • Page 92: Fabric Care Labels

    PrEPArATiON Fabric care labels Sorting laundry Most articles of clothing feature fabric care It is recommended that you sort laundry into labels that include instructions for proper care. similar loads that are washable in the same cycle. Category Label Directions Refer to the following chart for sorting clothes Hand Wash Colors...
  • Page 93: Using Detergent/Fabric Softener

    PrEPArATiON Using detergent/fabric softener recommended detergent About the dispenser Use HE (High-Efficiency) detergent for front- The automatic dispenser consists of three loading washing machines. HE detergents compartments which hold: dissolve more efficiently and produce • Liquid chlorine bleach. fewer suds to ensure efficient washing and •...
  • Page 94: Loading The Dispenser

    PrEPArATiON Loading the dispenser Main Wash detergent Compartment Liquid Bleach Compartment This compartment holds laundry detergent This compartment holds liquid chlorine bleach, which will be dispensed automatically at the for the main wash cycle, which is added to proper time during the wash cycle. the load at the beginning of the cycle.
  • Page 95: Operating Your Washer

    OPErATiNG YOUr WASHEr OPErATiNG YOUr WAShEr 1. ready mode 3. Select the cycle 1) Coin / Card type Press the desired button and press the Start button. The display LED will show the – The cycle LEDs are lit at the same time, remaining time and the selected cycle starts.
  • Page 96: Programming Mode

    PrOGrAMMiNG MOdE PrOGrAMMiNG MOdE : You can check machine information or change setting on Program setup, collect information data, Diagnostic test. There are two methods that you can enter programming mode. how to enter Programming mode how to use button You can enter programming mode only for Idle You can change Washer vend price, cycle time state and pause state.
  • Page 97: Card Type

    PrOGrAMMiNG MOdE Card type Algorithm flow chart shows how to control programming mode. Before program set, check the structure of programming mode. 1. Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instructions). 2.
  • Page 98: Coin Type

    PrOGrAMMiNG MOdE Coin type Algorithm flow chart shows how to control programming mode. Before program set, check the structure of programming mode. 1. Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instructions). 2.
  • Page 99: Opl Type

    PrOGrAMMiNG MOdE OPL type Algorithm flow chart shows how to control the programming mode. Before program set, check the structure of the programming mode. The method of entering set up mode. 1) Push the Hot & Cold button at the same time. 2) Push the Warm button 3 times.
  • Page 100: Programming Mode -Setup Mode

    PrOGrAMMiNG MOdE - SETUP MOdE PrOGrAMMiNG MOdE –SETUP MOdE Setup Mode : (display) You can change washer vend price, cycle time, and cycle parameters, etc. Entering setup mode - Coin type – Turn on/off toggle switch. - Card type – Insert the service card. - All types –...
  • Page 101: How To Change Regular Delicates Price

    PrOGrAMMiNG MOdE - SETUP MOdE 2. how to change regular delicates price. Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 102: How To Change Regular Warm & Cold Price

    PrOGrAMMiNG MOdE - SETUP MOdE 3. how to change regular warm & cold price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 103: How To Change Regular Hot Price

    PrOGrAMMiNG MOdE - SETUP MOdE 4. how to change regular hot price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 104: How To Change Special Price

    PrOGrAMMiNG MOdE - SETUP MOdE 5. how to change special price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 105: How To Change Special Delicates Price

    PrOGrAMMiNG MOdE - SETUP MOdE 6. how to change special delicates price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 106: How To Change Special Warm & Cold Price

    PrOGrAMMiNG MOdE - SETUP MOdE 7. how to change special warm & cold price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 107: How To Change Special Hot Price

    PrOGrAMMiNG MOdE - SETUP MOdE 8. how to change special hot price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 108: How To Change Add Super Wash Price

    PrOGrAMMiNG MOdE - SETUP MOdE 9. how to change add super wash price Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 109: How To Change Add Super Wash Type

    PrOGrAMMiNG MOdE - SETUP MOdE 10. how to change add super wash type Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 110: How To Enter The 110 - 11-1. Special Price Day Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 11. how to enter the Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 111 PrOGrAMMiNG MOdE - SETUP MOdE 11-1. Special price day setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 112: Non-Stop Rinse

    PrOGrAMMiNG MOdE - SETUP MOdE 11-2. Non-stop rinse Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 113: Add Super Wash Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 11-3. Add super wash setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 114: Vend Type Setup - Card Type Or Coin Type

    PrOGrAMMiNG MOdE - SETUP MOdE 11-4. vend type setup - card type or coin type setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button.
  • Page 115: Pre-Wash Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 11-5. Pre-wash setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 116: Twin Spray Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 11-6. Twin spray setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 117: How To Enter The

    PrOGrAMMiNG MOdE - SETUP MOdE 12. how to enter the Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 118: Pause Function Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 12-1. Pause function setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 119: How To Enter The Special Price Day

    PrOGrAMMiNG MOdE - SETUP MOdE 13. how to enter the special price day Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 120: How To Change To Sunday

    PrOGrAMMiNG MOdE - SETUP MOdE 13-1. how to change to Sunday Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 121: Special Price Beginning Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 14. Special price beginning time setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 122: Special Price Ending Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 15. Special price ending time setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 123: Prewash Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 16. Prewash time setup Prewash time setup can be used to set the time for prewash. Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display.
  • Page 124: Washing Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 17. Washing time setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 125: Rinsing Times Per Cycle

    PrOGrAMMiNG MOdE - SETUP MOdE 18. rinsing times per cycle Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 126: Rinsing Time Setup

    PrOGrAMMiNG MOdE - SETUP MOdE 19. rinsing time setup Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 127: Top Spin Speed - Final Spin Time

    PrOGrAMMiNG MOdE - SETUP MOdE 20. Top spin speed – final spin time depends on rPM Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button.
  • Page 128: Value Of Coin

    PrOGrAMMiNG MOdE - SETUP MOdE 21. value of coin 1 Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 129: Value Of Coin

    PrOGrAMMiNG MOdE - SETUP MOdE 22. value of coin 2 Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 130: Penny Increment Pricing Offset

    PrOGrAMMiNG MOdE - SETUP MOdE 23. Penny increment pricing offset This represents the cent increment price offset used when debit card is setup. Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display.
  • Page 131: How To Change The Water Level

    PrOGrAMMiNG MOdE - SETUP MOdE 24. how to change the water level You can change the water level by selecting two options. indicate water level 23,5 [KHz] indicate water level 23,0 [KHz] indicate water level 22,8 [KHz] Button Display Enter setup mode. You will see LqC1 Press the Hot button.
  • Page 132: Beep Volume

    PrOGrAMMiNG MOdE - SETUP MOdE 25. Beep volume Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 133: Time To Keep The Coin

    PrOGrAMMiNG MOdE - SETUP MOdE 26. Time to keep the coin (Use only for coin type) Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button.
  • Page 134: How To Set Drop Count

    PrOGrAMMiNG MOdE - SETUP MOdE 27. how to set drop count Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 135: How To Set Shut Down Time After Ue

    PrOGrAMMiNG MOdE - SETUP MOdE 28. how to set shut down time after UE Unbalance Error (UE) occurs when washer cannot balance the load within the selected drop counts. can be used to set the time for maintaining the UE status before shutting down the cycle. Button Display Enter setup mode.
  • Page 136: How To Set Rinse Spin Enable

    PrOGrAMMiNG MOdE - SETUP MOdE 29. how to set rinse spin enable Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 137: How To Set Drop Count For Rinse Spin

    PrOGrAMMiNG MOdE - SETUP MOdE 30 . how to set drop count for rinse spin can be used to set the number of drop counts for each rinse spin. Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display.
  • Page 138: How To Set Auto Dosing

    PrOGrAMMiNG MOdE - SETUP MOdE 31. how to set auto dosing Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 139: How To Enter The 139 - 33. How To Set Custom Program

    PrOGrAMMiNG MOdE - SETUP MOdE 32. how to enter the Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 140 PrOGrAMMiNG MOdE - SETUP MOdE 33. how to set custom program Button Display Enter setup mode. You will see LqC1 Press the Hot button. Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm or the Cold button until appears in the display.
  • Page 141: Programming Mode - Test Mode

    PrOGrAMMiNG MOdE - TEST MOdE PrOGrAMMiNG MOdE - TEST MOdE diagnostic tests: (display) This program has been added for testing the washer and detecting errors. Entering the test mode Data Name Button Display Description Entering 1. Entering Insert service card (card type), turn on/off toggle switch the test programming mode (Coin type).
  • Page 142: Factory Reset

    PrOGrAMMiNG MOdE - TEST MOdE 2. Factory reset - After factory reset, machine information is changed to the default value. Button Display Enter setup mode. You will see LqC1 Press the Warm or the Cold button until appears in the display. Press the Start button.
  • Page 143: Time Setup

    PrOGrAMMiNG MOdE - TEST MOdE 3. Time setup Button Display Enter setup mode. Press the Warm or the Cold button until appears You will see LqC1 in the display. Press the Start button. The display will cycle through 2000 --> 0101 --> Sat --> 0000 repeatedly.
  • Page 144: Courtesy Cycle

    PrOGrAMMiNG MOdE - TEST MOdE 4. Courtesy cycle A courtesy cycle is like a complimentary cycle given to the customer when the washer goes out of order after the customer has made the payment to wash clothes. Button Display Enter setup mode. You will see LqC1 Press the Warm or the Cold button until appears...
  • Page 145: Cycle Kill

    PrOGrAMMiNG MOdE - TEST MOdE 5. Cycle Kill Coin / OPL type Button Display Enter setup mode. You will see LqC1 Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm button until appears in the display.
  • Page 146: Password

    PrOGrAMMiNG MOdE - TEST MOdE 6. Password - How to change the password. Button Display Enter setup mode. You will see LqC1 Press the Warm or the Cold button until appears in the display. Press the Start button. Press the Warm button until appears in the display.
  • Page 147: Tub Clean

    PrOGrAMMiNG MOdE - TEST MOdE 7. Tub clean - To clean up the tub, please run the TUB CLEAN cycle. Button Display Enter setup mode. You will see LqC1 Press the Warm or the Cold button until appears in the display. Press the Start button.
  • Page 148: Programming Mode - Collect Mode

    PrOGrAMMiNG MOdE - COLLECT MOdE PrOGrAMMiNG MOdE - COLLECT MOdE Collect information data : (display) The washer collects the usage data so that the owner can check various information like number of various cycles used, how many times card or coins used, etc. Entering the collect mode Data Name Button...
  • Page 149: Collect Mode Data Lists

    PrOGrAMMiNG MOdE - COLLECT MOdE Collect Mode data lists No. Abbreviation Meaning Description rgPr Regular Price 0,00 ~ 10,00 rgCP Regular Delicates Price 0,00 ~ 10,00 rgrP Regular Warm & Cold Price 0,00 ~ 10,00 rgHP Regular Hot Price 0,00 ~ 10,00 dELC Dryer Moisture Sense 0: disable...
  • Page 150: Maintenance

    MAiNTENANCE MAiNTENANCE Care after wash Cleaning the dispenser 1. The dispenser should be cleaned periodically After the cycle is finished, wipe the door and the to remove buildup from detergent and other inside of the door seal to remove any moisture. laundry products.
  • Page 151: Cleaning The Detergent Box

    MAiNTENANCE Cleaning the detergent box Pull out the water inlet filter. In order to clean detergent box only, detach it from the machine it by pressing arrow as shown in below image. inlet Filter Remove foreign objects from the water filter inlet.
  • Page 152: Clean The Door Seal

    MAiNTENANCE NOTE Clean the door seal Distributer & Service Clean the door seal once a month to prevent build-up of dirt in the door seal. BIJELI SVIJET d.o.o. (Croatia) Wear rubber gloves and protective goggles. Kranjceviceva 50, Zagreb, Croatia Dilute 3/4 cup (177 ml) of liquid chlorine Tel.
  • Page 153: Error Mode

    ErrOr MOdE ErrOr MOdE Meaning of Error Codes that LEd displays during occurrence of problem. Problem Possible Cause Solution • Water supply is not adequate in area. Check another tap in the house. • Water supply taps are not completely open. Fully open tap.
  • Page 154: Power Fail Recovery

    POWEr FAiL rECOVErY & dEFAULT WASHEr SETTiNGS POWEr FAiL rECOvErY In case of power failure, the machine stops running but the time display remains on, showing the time just before power failure. dEFAULT WAShEr SETTiNGS Default Settings Default Wash Time (Minutes) 9 Minutes Rinse Time (Minutes) 18 Minutes...
  • Page 155: Specifications

    SPECiFiCATiONS SPECiFiCATiONS Model Name Front-loading Washing Machine Power supply 220-240 V~, 50 Hz 73,7 cm (W) X 81,4 cm (D) X 103,6 cm (H), 137 cm (D with door open) Size 29”(W) X 32”(D) X 40,8”(H), 53”(D with door open) Weight 223,1 lbs.
  • Page 156 MEMO...

Table of Contents