Operating Your Washer - LG FH0C7FD3S Owner's Manual

22

OPErATiNG YOUr WASHEr

OPERATING YOUR WASHER
1. Ready mode
1) Coin / Card type
– The cycle LEDs are lit at the same time,
when the price of cycles are equal.
2) OPL type
– The cycle LEDs flash at the same time,
and displayed 'PUSH'.
NOTE
• Price setting varies by country
• Set your country from
(Refer How to enter the
• After EEPT, reset your country (Default
country is EUK)
2. Insert card/coin (not for OPL
type)
Insert a cash card that has a sufficient
balance.
The card balance should be more than
the programmed vend price for a selected
cycle.
NOTE
• When the card balance is not enough,
machine displays the card balance for 5
seconds and then displays
message repetitively
• Insert a sufficient amount of change that
is more than the programmed vend price
for the selected cycle.
NOTE
• The machine will not start until sufficient
coins are inserted.
3. Select the cycle
• Select cycles designed for different types of
mode
)
4. Custom PGM
5. Change course
6 . Cycle finish
❋ Do not work any button and stop the washer
Press the desired button and press the
start button.
The display LED will show the remaining
time and the selected cycle starts.
fabric and soil levels.
Wash/Rinse
CYCLE
Temp.
90°C (194°F) Extra Hot/Cold
75°C (167°F) Extra Hot/Cold
60°C (140°F) Hot/Cold
40°C (104°F) Warm/Cold
30°C (86°F) Warm/Cold
Cold Cold/Cold
Press and hold 'Cold' button for 3 seconds.
You can use courses you have created.
(Only OPL Type)
You cannot change the course while the
machine is running.
The machine stops and LED display shows
" " with beeper sound.
(When the washer is operating) or (when a
cycle is in progress)
WArNiNG
• To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.
Spin Speed
High
High
High
Middle
Middle
Low