Tub Clean - LG FH0C7FD3S Owner's Manual

Commercial washer
Table of Contents

Advertisement

7. Tub clean -

To clean up the tub, please run the TUB CLEAN cycle.
Entering set up
mode.
You will see LqC1
NOTE
• Never load laundry while using TUB CLEAN. The laundry may be damaged or become con-
taminated. Make sure to clean the washer tub when it is empty.
• Leave the door open after finishing the laundry to keep the tub clean.
• TUB CLEAN should be repeated monthly.
• Safely and conveniently secure the door slightly ajar with a magnetic door plunger. This will
promote air circulation and allow the interior of the machine to dry.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press Start button.
Display show the remaining time and Tub clean Start.
When the TUB CLEAN cycle is finished,
displayed with beeping.
Go back to ready mode.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
PrOGrAMMiNG MOdE - TEST MOdE
Button
Display
is
71

Advertisement

Table of Contents
loading

Table of Contents