Washing Time Set Up - LG FH069FD3P Owner's Manual

48
PROGRAMMING MODE - SETUP MODE

16. Washing time set up

Entering set up
mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button. Display
Press Warm or Cold button to select course.
: Hot course
: Warm course
: Cold course
: Delicates course
: None (only for Heater model)
Press the Start button.
Display previous wash time.
Press Warm(+) or Cold(-) button to select wash time.
(Maximum 15 minutes, Minimum 5 minutes.)
Press the Start button.
The machine sets up the wash time, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button three times.
Button
.
Display
appears
appears