Table of Contents
Advertisement
4.3.9 Track Power Indicator
This very small star shaped dot (shown larger than life above) located in
the top line of the LCD on the right side indicates the status of the
track power.
No indicator = System track power is OFF (Press PWR followed by N-)
Indicator On Steady = System track power is ON(Press PWR followed
by Y+)
Blinking Indicator = System is in "STOP" and track power is ON
(Press PWR followed by Y+ and Y+ again)
4.3.10 Tetherless Indicator
The tetherless indicator shows when your throttle is using either infrared or
radio communications.
4.3.11 L & R Semaphores-Cab Signaling
The L & R Semaphores are used when cab signaling is implemented on
the layout. More information about signaling and detection will be avail-
able on our web site, www.digitrax.com as these products become available.
Information on how to activate these indicators will be included in the manuals
for our detection and signaling products. Information will also be available
from other LocoNet Certified manufacturers when they have implemented
these features in their software.
The L & R Semaphores will display the following:
= Clear
= Approach
= Stop
L & R Semaphores
Tetherless
22
Track Power
Advertisement
Table of Contents
