Table of Contents
Advertisement
4. Press the LOCO Key
5. The left loco icon will appear in the display with a direction arrow
and "blinking smoke"
side of the throttle is displaying function information on the top line
of the LCD.
The illustration above shows the LCD after address "00" is selected on
the R Throttle and address "03" is selected on the L Throttle, We
see the Power On Indicator in the top line, the speed bar graphs at 0
speed and the text area also at 0 speed for both throttles.
6. Use the L Throttle knob to run the DCC equipped locomotive on
address 03. As the value in the left display increases, the locomo-
tive with decoder address 03 on the track will begin to move. Press
the L Reverse Key
click the L Throttle Knob to reverse the direction of the locomotive.
7. Turn the L Throttle knob counterclockwise to 0 speed to stop the
loco.
8. Use the R Throttle knob and R Reverse Key
log loco and the L Throttle knob and L Reverse Key
the DCC equipped loco. You can control both at the same time.
to select address 03 on the L throttle.
LOCO
. The "blinking smoke" indicates which
L
on the left side of the DT400 or double
13
R
to control the ana-
to control
L
Advertisement
Table of Contents
