Frequently Asked Questions - Sharp IG-HH1A Operation Manual

FREQUENTLY
ASKED QUESTIONS
Are there ON/OFF Timer functions?
You can set "OFF Timer" by pressing the TIMER button during operation. (See page E-12.)
You can set "ON Timer" by pressing the TIMER button while not in operation. (See page E-12.)
*The ON Timer and OFF Timer cannot be set at the same time.
Is it possible to start hot fan operation with the remote controller?
For safety reasons, you cannot start hot fan operation/foot warming operation and set the
timers with the remote controller.
Operation fails?
● Have you made sure the plug is fully inserted into the power outlet?
Insert the plug into the outlet securely. (See page E-3.)
● Is the fuse or circuit breaker damaged?
Use a power outlet rated at 220 V 13 A.
● Is the Plasmacluster Ion Generating Unit securely mounted?
Mount it securely. (See page E-19.)
● Is the main unit tilted and unsteady? Place it on a horizontal surface. (See page E-5.)
● Is child lock set? Cancel the child lock setting. (See page E-15.)
Is there any "Zi" sound?
It's the sound of Plasmacluster ions emission and is normal.
(The sound may be heard at different intervals.)
Depending on the operation environment or mode, the sound may be loud, soft or silent,
but the emission of Plasmacluster ions will not be affected.
* The emission of Plasmacluster ions is not affected by the operation mode.
IG-HH1A_0607.indd 2
Please also refer to
"TROUBLESHOOTING"
on pages E-20 and E-21.
E-2
2017/06/13 13:24:03