Sharp IG-HH1A Operation Manual page 13

ON/OFF Timer
OFF Timer (The operation will stop automatically when the set time is reached.)
(While in operation)
Main unit
1
● Press for 1
second or more.
ON Timer (The operation will start automatically when the set time is reached.)
(While not in operation)
Main unit
1
● Press for 1
second or more.
("ON" indicator light flashes)
2
Select your desired operation mode (hot fan/foot warming/
cool fan and fan speed.)
Each time when the button is pressed, the TIMER indicator light switch as follows. (OFF Timer/ON Timer)
Pip
*To cancel the timer setting, press the TIMER button for 1 second again until the TIMER indicator light off.
● If turned on the hot fan/foot warming operation mode by the ON Timer, the Auto-off function will be activated
and the operation will be automatically stopped after 2 hours.
CAUTION
(The fan operation will continue.)
● Unplugging the unit (or power failure) will cause the ON Timer settings to be restored to the default settings
(Cool fan operation, Auto Fan Speed, no holizontal or vertical swing).
● At the end of ON Timer setting, press HOT FAN/FOOT WARMING/COOL FAN button to cancel the ON Timer,
and start the operation.
● At the end of ON Timer setting, the ON Timer function will be cancelled by unplugging the unit.
● ON Timer cannot be set in Plasmacluster Ions mode and Clothes Deodorizing mode.
IG-HH1A_0607.indd 12
wYou cannot set ON/OFF Timer at the same time.
("OFF" indicator flashes)
Pip
Display panel
(flashing)
("ON" indicator light flashes)
Pip
Display panel
(flashing)
Pip Pip
● At the end of the setting, the TIMER
indicator light (white) and the OFF TIMER
indicator light (white) will turn on.
● After the timer is activated, the TIMER
indicator light will display the remaining
time.
Select your desired
period of time.
● At the end of the setting, the TIMER
indicator light (white) and the ON
TIMER indicator light (red) will turn on.
● After the timer is activated, the TIMER
indicator light will display the remaining
time.
Select your desired
period of time.
● The vertical and holizontal swing setting
will follow the last setting of previous
operation.
● If operation mode is not selected, it
will follow the last setting of previous
operation.
Pip
See page E-5
E-12
Pip Pip
Light off
The Timer is "cancelled"
2017/06/13 13:24:18