Specifications - Sony Bravia KDF-E42A11E Operating Instructions Manual

Additional Information

Specifications

Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDF-E50A11E: 50 inches
KDF-E42A11E: 42 inches
Display Resolution (horizontal x vertical):
1280 dots x 720 lines
Power Consumption:
175 W
Standby Power Consumption:
0,8 W
Dimensions (w × h × d):
KDF-E50A11E:
Approx. 825 x 1180 x 395 mm
KDF-E42A11E:
Approx. 720 x 1000 x 350 mm
Weight:
KDF-E50A11E:
Approx. 29.6 kg
KDF-E42A11E:
Approx. 25.1 kg
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analogue: Depending on your country/region selection:
B/G/H, D/K, L, I.
Digital: DVB-T.
Colour/Video System
Analogue: PAL, SECAM.
NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
Analogue: VHF:
UHF: E21–E69
CATV: S1–S20
HYPER: S21–S41
D/K: R1–R12, R21–R69
L: F2–F10, B–Q, F21–F69
I: UHF B21–B69
Digital: VHF/UHF
44
GB
E2–E12
Terminals
• AV1: / 1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
• AV2: / 2 (SMARTLINK)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SmartLink interface
• AV3: 3
Y:1 Vp-p, 75 ohms, 0.3V negative sync
P :0.7 Vp-p, 75 ohms
B
P :0.7 Vp-p, 75 ohms
R
3 Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
• AV4: 4S video input (4-pin mini DIN)
4 Video input (phono jack)
4 Audio input (phono jacks)
• AV5: 5
PC Input (15 Dsub) (see page 36)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms, non Sync on Green
R: 0.7 Vp-p, 75 ohms, non Sync on Green
HD: 1-5 Vp-p
VD: 1-5 Vp-p
PC audio input: minijack.
• Audio output (Left/Right) (phono jacks)
• AV6: 6
HDMI: Video: 480i, 576i, 480p, 576p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits.
AUDIO:500 mVrms (100% modulation)
Impedance: 47 kilohms
• i Headphones jack
CAM (
• Conditional Access Module) slot
MODEM
Modem jack (Not supported on this TV)
Sound Output
10 W +10 W (RMS)
Supplied Accessories
• Remote RM-ED002 (1)
• Size AA batteries (R6 type) (2)
• Coaxial cable (1)