Sony Bravia KDF-E42A11E Operating Instructions Manual page 33

Option Description
Improves the sound for individual channels in the case of distortion
Audio Filter
in mono broadcasts. Sometimes a non-standard broadcast signal
can cause sound distortion or intermittent sound muting when
watching mono programmes.
1
2
Note
You cannot receive stereo or dual sound when "Low" or "High" is
selected.
Skips unused analogue channels when you press PROG +/- to
Skip
select channels. (You can still select a skipped channel using the
number buttons.)
1
2
To restore a skipped channel, select "No" in step 1.
Records the scrambled channel selected when using a decoder
Decoder
connected to the scart connector
VCR.
Note
Depending on the country/region selected for "Country" (page 29), this
option may not be available.
1
2
To cancel this function afterwards, select "Off" in step 1.
Attenuates the RF signal. In case of a strong RF signal, some video
ATT
interference may be displayed.
1
2
Tip
This option cannot be used if "AV2 Output" is set to "D-TV" (page 26)
Press M/m to select "Low" or "High", then press OK.
If you do not experience any sound distortion, we recommend
that you leave this option set to the factory setting "Off".
Press OK to select "Confirm", then press OK.
Press M/m to select "Yes", then press OK.
Press OK to select "Confirm", then press OK.
Press M/m to select "On", then press OK.
Press OK to select "Confirm", then press OK.
Press m/M to select "On", then press OK.
Press OK to select "Confirm", then press OK.
/ 2 either directly or via a
Continued
33
GB