Features Menu; Av2 Output; Tv Speakers - Sony Bravia KDF-E42A11E Operating Instructions Manual

Features menu

Features

AV2 Output

TV

TV Speakers

On
PC Adjustment
Select: Set: Back:
OK
AV2 Output
TV Speakers
26
GB
End:
MENU
Sets a signal to be output through the socket labelled
you connect a VCR to the
connected to other sockets of the TV.
1
Press OK to select "AV2 Output".
2
Press m/M to select one of the following, then press OK.
• D-TV: Outputs a digital broadcast.
• A-TV: Outputs an analogue broadcast.
• AV1: Outputs signals from equipment connected to the
• AV4: Outputs signals from equipment connected to the
• Auto: Outputs whatever is being viewed on the screen.
Turns off the TV speakers e.g. to listen to the sound through external audio equipment
connected to the TV.
1
Press OK to select "TV Speakers".
2
Press m/M to select one of the following, then press OK.
• On: the sound is output from the TV speakers.
• One Time Off: the TV speakers are temporarily turned off allowing you to listen to the
sound from external audio equipment.
Tip
The "TV speakers" option automatically returns to "On" when the TV set is switched off.
• Permanent Off: the TV speakers are permanently turned off allowing you to listen to
the sound from external audio equipment.
Tip
To turn on the TV speakers again, change to on.
You can select the options listed below on the
Features menu. To select options, see "Navigating
through menus" (page 19).
/ 2 socket, you can then record from the equipment
/ 2 on the rear of the TV. If
/ 1 socket.
4/ 4 socket.