Start-Up Guide - Sony Bravia KDL-40ZX1 Operating Instructions Manual

Start-up Guide

1: Checking the unit and
accessories
Monitor (1)
Media receiver (1)
Mains lead for monitor (1)
Mains lead for mains adaptor (1)
Mains adaptor for media receiver (1)
Remote RMF-ED001 (1)
Size AA batteries (R6 type) (2)
IR Blaster (Y-cable) (2)
Stand for media receiver (1)
Terminal cover (1)
Spacers (black) (4)
4
GB
2: Installing the TV
The following steps must be performed to
correspond with the installation steps in the
instruction manual of the optional accessories.
Follow the instructions in this manual
referring to the instruction manual supplied
with the accessories. For explanations referred
to in ( ) in the installation steps, see the same
steps in the instruction manual supplied with
the accessories.
Installing on a TV stand
Prepare the following item;
– SS-TBL700 Speaker System (not supplied)
~
• Before performing the following instructions, first
you must prepare the SS-TBL700 Speaker System
(Table-Top Stand). Attach the Base Plate to the
Table-Top Stand as shown in the instruction
manual of the SS-TBL700 Speaker System.
• Do not remove the blue tape that secures the plate
on the rear of the monitor, until you finish
installing the Table-Top Stand.
1
Remove the stand cover.
2
Gently slide the monitor onto the neck of
the Table-Top Stand by aligning the F
mark of the plate to the top part of the
Table-Top Stand. Be sure to work with
two or more people.
Stand
cover