Sony Bravia KDL-40ZX1 Operating Instructions Manual page 45

Auto Volume
Volume Offset
~
• Some options are not available when "Speaker" is set to "Audio System" or headphones are connected.
Screen
Screen Format
Auto Format
4:3 Default
Display Area
Horizontal Shift
Vertical Shift
Vertical Size
HDMI Set-up
This is used to set the "Control for HDMI" compatible equipment connected to the HDMI sockets.
Note that the interlock setting must also be made on the connected "Control for HDMI" compatible
equipment side.
Control for HDMI
Auto Devices Off
Auto TV On
Device List Update
HDMI Device List
Keeps a constant volume level even when volume level gaps occur (e.g., adverts
tend to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs.
See "To change the screen format manually" on page 24.
Automatically changes the screen format according to the input signal. To keep
your setting, select "Off."
Selects the default screen format for use with 4:3 broadcasts.
Smart Displays conventional 4:3 broadcasts with an imitation wide
screen effect.
4:3 Displays conventional 4:3 broadcasts in the correct
proportions.
Off Keeps the current "Screen Format" setting when the channel
or input is changed.
Adjusts the picture display area in 1080i/p and 720p sources when "Screen
Format" is set to "Wide."
Full Pixel
Displays pictures in their original size if the input source is
1080i/p.
Normal Displays pictures in their recommended size.
-1/-2
Enlarges the picture to hide the edges of the picture.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture when "Screen Format" is set to "Zoom."
Adjusts the vertical size of the picture when "Screen Format" is set to "Smart" or
"Zoom."
This sets whether to interlock the "Control for HDMI" compatible equipment and
the unit. When set to "On", the following menu items can be performed. However,
power consumption in standby mode is higher than usual.
When this is set to "On", the "Control for HDMI" compatible equipment turns off
when you switch the unit to standby mode using the remote.
When this is set to "On" and if the connected HDMI, control compatible
equipment is turned on, the unit automatically turns on, and the displays the HDMI
input from the connected equipment.
Creates or updates the "HDMI Device List." Up to 14 "Control for HDMI"
compatible equipment can be connected, and up to 4 equipment can be connected
to a single socket. Be sure to update the "HDMI Device List" when you change the
"Control for HDMI" compatible equipment connections or settings. Select them
manually one by one until getting a correct picture for several seconds.
Displays the connected "Control for HDMI" compatible equipment.
45
GB