Sony Bravia KDL-40ZX1 Operating Instructions Manual page 46

Monitor Set-up
Power Saving
Light Sensor
Product Information
Remote Control Set-
up
Wireless Channel
Set-up
Language
PC Settings
Screen Format
Reset
Horizontal Shift
Vertical Shift
46
GB
Reduces the power consumption by adjusting the backlight brightness. This also
enhances the black level. Select from "Off", "Low", "High" and "Picture Off".
On Automatically optimises the picture settings according to the
ambient light in the room.
Off
Turns off the "Light Sensor" feature.
~
• Be sure not to put anything over the sensor, as its function may be affected. See
page 22 for the location of the light sensor.
• Depending on the "Picture Mode" and "Power Saving" settings, the effect of
"Light Sensor" may vary.
Displays your monitor's product information.
Registers a remote to the unit, otherwise the remote cannot be used with the unit.
Instruction screens appear if you register or delete a remote. Follow the
instructions to register or delete.
~
• The remote can only be registered to only one unit.
Wireless
Selects a wireless channel from "Auto", "36ch", "40ch",
Channel "44ch" or "48ch".
Selection
If the wireless channel is uncertain, select "Auto" to search
an available channel.
Wireless Displays information about the current wireless channel and
Information link level.
Selects the language in which the menus are displayed.
Selects a screen format for displaying input from your PC.
Normal Displays the picture in its original size.
Full 1 Enlarges the picture to fill the vertical display area, keeping
its original horizontal-to-vertical aspect ratio.
Full 2 Enlarges the picture to fill the display area.
Resets the PC screen settings to the factory settings.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.