Sony Bravia KDL-40X4500 Operating Instructions Manual page 38

Sound
Target Inputs
Sound Mode
Reset
Treble
Bass
Balance
Auto Volume
Volume Offset
38
GB
Black Corrector Enhances black areas of the picture for stronger contrast.
Adv. Contrast Automatically adjusts "Backlight" and "Contrast" to the most
Enhancer suitable settings judging from the brightness of the screen.
This setting is especially effective for dark images scenes,
and will increase the contrast distinction of the darker picture
scenes.
Gamma
Adjusts the balance between bright and dark areas of the
picture.
LED Dynamic Sharpens the contrast by making dark parts of the picture
Control (for KDL-
even darker.
55X4500/46X4500)
Auto Light Reduces glare such as in scenes where the entire screen is
Limiter
white.
Clear White Emphasises white colours.
Colour Space Changes the colour reproduction gamut. "Wide" reproduces
the vivid colour and "Standard" reproduces the standard
colour.
Live Colour Makes colours more vivid.
White Balance Adjusts the temperature of each colour.
Detail Enhancer Enhances the details of the picture.
Edge Enhancer Enhances the outline of the picture.
Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing. Set to "Common" if you want to
apply the same settings to each input.
Common
Applies common settings to all inputs in which "Target
Inputs" is set to "Common".
Name of current Allows you to make custom settings for the input.
input (e.g. AV1)
Dynamic Enhances the treble and bass sounds.
Standard For standard sounds. Recommended for home entertainment.
Clear Voice
Makes voice sound clearer.
Resets all the "Sound" settings to the factory settings excluding "Target Inputs",
"Sound Mode" and "Dual Sound".
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasises the left or right speaker.
Keeps volume level constant across all programmes and adverts (e.g. adverts tend
to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs, when "Target
Inputs" is set to the current input name (e.g. AV1).