Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KASTKSTM06A
Summary of Contents for Kogan KASTKSTM06A
- Page 1 6-IN-1 STEAM MOP STICK KASTKSTM06A...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. • Read all instructions before using the appliance and retain for reference. •... - Page 4 Always allow the appliance to cool completely (at least 5 minutes) before storing. Follow instructions in the Cleaning & Care section of this user guide. • This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease use and contact help.kogan.com before further use.
- Page 5 OVERVIEW Water tank Mop head Steam button Nylon brush Steam level indicator Brass brush Main body Measuring cup Upper release button Steam nozzle Extension rod Window Tool Lower release button Microfiber pads...
- Page 6 ASSEMBLY Steam Nozzle Align the steam nozzle with the head of the main unit, then rotate it until the steam nozzle is firmly locked into position. Attaching Accessories Firmly attach the desired accessory to the steam nozzle until it is locked in place. Ensure the orientation of the elbow directs the steam downwards.
- Page 7 Installing Extension Rod and Mop Head When cleaning high, out of reach places or mopping the floor, the extension rod and mop head should be used. Extension Rod: Align the extension rod with the nozzle on the main body, hold down the upper release button and gently rotate the extension rod until it ‘clicks’...
- Page 8 Installing Microfibre Pads • Lay the microfibre pad on a flat surface with the two fastener strips facing upward. • Align the mop head above the microfiber pad. Ensure the mop head is oriented with the pads as shown below. •...
-
Page 9: Operation
OPERATION Filling the Water Tank • Ensure the steam mop is turned off and unplugged from the outlet. • Unscrew the water tank cap and use the measuring cup to fill the water tank with water. Do not over fill the water tank. Hold the main body level while filling. •... - Page 10 Starting the Steam Mop • Make sure the device has been filled with water before turning on. Do not run dry. • Plug the power cord into a power outlet and switch on. • Wait about 20 seconds until the middle indicator turns solid. •...
-
Page 11: Cleaning And Care
CLEANING & CARE IMPORTANT: Allow the steamer to completely cool down before performing any maintenance or troubleshooting checks. Maintenance This product contains no user serviceable parts. Do not attempt to repair it yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician. -
Page 12: Specifications
SPECIFICATIONS Rated Voltage 220-240V Rated power 1200W Rated Frequency 50/60Hz Tank Capacity 0.25L Operating time 10-25min... - Page 13 The steam mop is not heating. Check the steam mop is properly connected to the power outlet. The machine does not emit steam. • Check that the water tank has was enough water in it. • Ensure the ball in the water tank fully immersed into water The machine leaked a lot of water The steam position is not set properly.
- Page 14 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...