Download Print this page
Ironwood DMS Manual
Hide thumbs Also See for DMS:

Advertisement

Quick Links

DMS
DELUXE
MACHINE STAND
IM P O RTA N T !
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
0820
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.

Advertisement

loading
Need help?

Need help?

Do you have a question about the DMS and is the answer not in the manual?

Questions and answers

Summary of Contents for Ironwood DMS

  • Page 1 DELUXE MACHINE STAND IM P O RTA N T ! In the event any parts are missing from Assembly may require the assistance of this package, send your name, address, another person. telephone number, and a description of Before you begin assembly: the missing part(s) to: PARTS, Box 1420, Missoula, MT 59806 or call: READ THE DIRECTIONS all the way through one...
  • Page 2: Parts Diagram

    PARTS DIAGRAM 0585091 1 ea. Left Side 05850941 1 ea. Right Side 05850941 1 ea. Bottom 0585091 1 ea. Left Door 05850974 1 ea. Back 05850952 1 ea. Drawer Side 068270 2 ea. Shelf 05850924 1 ea. Drawer 05850963 1 ea. Front Drawer End 068070...
  • Page 3 Large Panead 988056 16 ea. Screw Rafix Shelf Cam 909912 4 ea. Plate Caster 4020501 2 ea. 400201 4 ea. Hinge Plate Plate Caster 402051 2 ea. W/ Lock Varianta Screw 988060 6 ea. Flush Rafix 909911 10 ea. Shelf Pin 909924 4ea.
  • Page 4 18” Slide 490296 2 ea. 18” Slide 490296 2 ea. Glue 295020 1 ea. Confirmat 950100 8 ea. Screw Phillips 1-1/2" 901119 6 ea. Flathead Screw 920202 2 ea. Washerhead Screw...
  • Page 5 Screw 5 Rafix Bolts(H11) into the pre-drilled holes of Left Side (A) and seven Rafix Bolts into the pre-drilled holes of Right Side (B) where indicated.
  • Page 6 Attach two Hinge Plates (H6) to the Left Side (A) and two Hinge Plates to the Right Side (B) using attached screws into the pre-drilled holes as shown. IMPORTANT! The large hole and slots must be oriented to the rear edge of the Hinge Plates as shown.
  • Page 7 Insert six Flush Rafix Cams (H4 into the Back (D) facing out and 2 Flush Rafix cams (H4) in the the bottom two cam holes in both sides. Position Back onto Left Side (A) as shown and secure cams Insert four Rafix Cams (H10) into the Top (C) facing out.
  • Page 8 Position the Right Side (B) Rafix Bolts into the corresponding Cams of the unit as shown. Insert 4 Rafix Bolts into Bottom (E) Position and secure. Attach four Plate casters (H2 and H3) to the Bottom Panel (E) using the Panhead Screws in the pre-drilled holes as shown.
  • Page 9 Using the Rafix System: Insert the Rafix Cams into the appropriate holes. The flat edge of the cam should be facing the edge Flat of the panel. edges must be Slide Rafix Cams of the panel to be aligned attached onto the corresponding posts. When screwing post into hole, Do Not over tighten.
  • Page 10 # 10 Place 4 Shelf Pins (H8) into pre-drilled holes of each Side (A and B) at a selected height. # 11 Using a Plastic Mallet, insert the Hinges (H12) to the Left and Right Doors (I and J) as shown. Remove backings and press Door Bumpers (H13) onto the opposite corners of Doors where indicated.
  • Page 11 Attach a Drawer Pull (H14) to each Door ( I and # 12 J) using 1" Washerhead Screws (H15) as shown. To attach the Doors (I and J) to the unit, slide the slots of the Hinges (H12) onto the Hinge # 13 Plates (H6) until the release buttons click into place.
  • Page 12 # 15 # 16 Spread a thin layer of glue on both end Apply glue to the exposed edge of the edges and one side edge of Drawer Bottom Drawer Bottom (D5) and Drawer Ends (D5). (D2). Position the other Drawer Side (D1) onto unit with the groove aligned Slide the Drawer Bottom (D5) into grooves with the edge of the bottom.
  • Page 13 # 18 Attach the left Shelf Slide (S2) to the Drawer Attach the right Shelf Slide (S2) to the Drawer unit using the Flathead Screws (H20) in the unit using the Flathead Screws (H20) in the indicated holes as shown. indicated holes as shown.
  • Page 14 # 20 With the drawer in place, check to insure that the Drawer Front (L) is aligned level and with equal spacing at the edges. If the Drawer Front needs adjustment, loosen Washer Head Screws (H15) slightly, move Drawer Front to the correct [position and retighten screws. EQUAL SPACING LEVEL DRAWER FRONT...