Download Print this page

Ironwood Glacier G42SA Quick Start Manual

Glacier alpine / terrain library shelving unit

Advertisement

Quick Links

BY
GLACIER ALPINE / TERRAIN
LIBRARY SHELVING UNIT
G42SA G48SA
G60SA G72SA
G84SA
SINGLE FACED
ADDER UNIT
IM PO R TA NT !
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
0115
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX 1-800-445-5281.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Glacier G42SA and is the answer not in the manual?

Questions and answers

Summary of Contents for Ironwood Glacier G42SA

  • Page 1 GLACIER ALPINE / TERRAIN LIBRARY SHELVING UNIT G42SA G48SA G60SA G72SA G84SA SINGLE FACED ADDER UNIT IM PO R TA NT ! In the event any parts are missing from Assembly may require the assistance of this package, send your name, address, another person.
  • Page 2: Parts Diagram

    PARTS DIAGRAM The diagram show one size for ease of viewing. Any differences will be indicated in each part’s description. 1 ea. G42SA 01026144 1 ea. G48SA 01026344 Spanner 01026089 2 ea. Divider GT60SA 1 ea. 01026544 Panel G72SA 1 ea. 01026744 G84SA 1 ea.
  • Page 3 If you have purchased an Adder unit to be assembled in conjunction with this Base unit, it is important to read all the way through the Adder instructions (enclosed in the Adder carton) before beginning. It will be necessary to substitute a Divider (J) for a Right Side (B) during assembly. NOTE: The diagrams show one size for ease of viewing.
  • Page 4 USING THE TAB-V SYSTEM: Using a plastic mallet, tap in the plastic housings with the flat edge facing outwards until flush with the surface. IMPORTANT! The flat edge of the plastic FLAT housing must be EDGE aligned with the shelf edge.
  • Page 5 Using the Minifix System: Insert the Minifix Cams into the appropriate holes with the arrow facing outwards as shown. When screwing post into hole, Do Not over tighten. Screw post down until bottom face of post flange just touches board surface. ASSEMBLED DISASSEMBLED Using the #2 Phillips screwdriver,...
  • Page 6 Insert Minifix Cam (H3) into the corresponding holes on the spanner and Toe Kick Panels. Part D has no Edgeband Insert Tab V Housing (H5) into the holes of the Top Panel. Remove shelves and Top Panel (E).
  • Page 7 Remove Back Panel. Remove screws from one side of metal spanner (H1). Loosen Minifix Cams (H3) on one side. Remove Right Panel (B). Attach Divider Panel to Unit and secure by tightening Minifix Cams (H3) and inserting Varianta Screws (H7) to Metal Spanner (H1). Attach spanners and Toe Kick to the other side of Divider Panel (F) and secure using...
  • Page 8 Attach Right Panel (B) to unit and secure using Minifix Cams (H3) and Varianta Screws (H7). Insert Top Panels (E) and Secure using Screw in Tab V System. # 10 Slide in Back Panel (H2) and hold in place by screwing in Panhead Screws (H8) into Bottom Spanner (C).
  • Page 9 # 11 Insert Shelf Clips and insert Shelves (see Shelving Assembly Sheet)

This manual is also suitable for:

Glacier g48saGlacier g60saGlacier g72saGlacier g84sa