Panasonic VDR-M30PP Service Manual page 54

1) Turn the hood (a) in the direction of the
arrow to remove it. (See Fig. 4-8-1)
2) Remove the three screws [A], and then
remove the filter piece (b). Be careful not to
scratch the lens surface with screwdriver at
this time. (See Fig. 4-8-1)
3) Remove the lens cover (c) in the direction of
the arrow. (See Fig. 4-8-1)
4) Insert a screwdriver, etc. into the gap in
case at the top of product, and move the lock
arm (d) in the direction of the arrow to open
the disc loading block. (See Fig. 4-8-2)
5) After removing the disc, close the disc
loading block to protect the disc drive unit.
When reinstalling removed components, use
the reverse procedure to removal.
(a) Hood
(b) Filter Piece
(c) Lens Cover
(b)
1
2 [A]
(a)
[A] M1.7×4 (Black)
Fig. 4-8-1 How to Remove Disc
(d)
Fig. 4-8-2 How to Remove Disc
(c)
3
(d) Lock Arm