Download Print this page

Panasonic VDR-M30PP Service Manual page 40

Dvd video camera/recorder
Hide thumbs Also See for VDR-M30PP:

Advertisement

Table 4-5-1 shows the error codes that are likely to frequently appear, and troubleshooting when
they appear.
Error code
Contents of problem
0400
Recognition of disc failed.
1100
Reading of data from disc failed.
10AE
Disc physically damaged, i.g.,
10AF
scratched or distorted.
0280
The optical pickup in disc drive unit
failed to move.
2881
Recognition of disc failed. [This
message is likely to appear frequently
when the ambient temperature is too
low (0°C or less)].
Table 4-5-1 Major Error Codes and Troubleshooting (1/2)
Troubleshooting
1) Set the power switch to "POWER OFF", reattach the
battery or AC adapter/charger, and then set the
power switch to "VIDEO" or "PHOTO" (disc).
Take care not to subject VDR-M30 to impact or
vibrations at this time.
2) Set the power switch to "POWER OFF", remove the
disc and check whether or not it is dirty, scratched or
distorted. If it is dirty, clean it referring to the next
page, and then reload it. If it is scratched or distorted,
use another disc.
Then set the power switch to "VIDEO" or "PHOTO"
(disc).
3) Replace the disc without regard as to whether it is
dirty, scratched or distorted.
Replace the disc.
1) Check the ambient temperature.
2) Set the power switch to "POWER OFF", remove the
disc and check whether or not it is dirty, scratched or
distorted. If it is dirty, clean it, and then reload it. If
it is scratched or distorted, replace the disc.
Then set the power switch to "VIDEO" or "PHOTO"
(disc).
Disc cleaning method:
Use soft cloth to clean
from inner to outer
circumference in
axial direction.
[Never use solvent.]
3) Check to see whether or not condensation has
occurred. If condensation has occurred, set the power
switch to "POWER OFF" with the disc loaded, and
then leave the VDR-M30 in a dry place for 1-2 hours.
4) Replace the disc.

Advertisement

loading

This manual is also suitable for:

Vdr-m30egVdr-m30bVdr-m30en