Panasonic VDR-M30PP Service Manual page 16

Perform troubleshooting in the order shown in Fig. 4-1-1.
Check
System reset
phenomenon
(section 4-2)
: Phenomenon
: Troubleshooting
: Check
*1: Messages and error codes will appear on LCD monitor or in viewfinder.
Note:
1) Before troubleshooting or servicing, be sure to obtain customer approval for the following:
a) The image data stored on disc may be lost depending on the details and situation of fault
(defect).
b) The date/time and various settings, including video recording mode, designated by customer
after purchase may in some cases be reset to the defaults before purchase (factory settings).
2) Take note of settings on received product, referring to "4-2 System Resetting/Resetting Camera
Functions": The notes will be necessary not only for resetting, but for checking defects that occur
under the particular setting conditions.
No message or
Problem guide
error code
(section 4-3)
*1
appears
Messages and
Message
Troubleshooting
*1
appears
(section 4-4)
Major Error
Error code
Codes and
*1
appears
Troubleshooting
(section 4-5-3)
Fig. 4-1-1 Troubleshooting Procedure
Updating
No improvement
unneeded
Check firmware
version
(section 4-6-1)
Updating
needed
Update firmware
(section 4-6-2)
No improvement
after updating
Trouble
Diagnosis
(section 4-7)