Panasonic VDR-M30PP Service Manual page 21

1) Connect the battery or AC adapter/charger to power the VDR-M30.
2) Set the power switch to "VIDEO" and place the VDR-M30 in the recording pause status; loading
disc is not necessary at this time. For the following steps, operate VDR-M30 while viewing the
LCD monitor or viewfinder.
3) Press the MENU button to display the camera setting menu screen.
4) Use the joystick to choose "Initial Setup", and then press the playback/pause button (press the
center of joystick).
5) Use the joystick to choose "Reset", and then press the playback/pause button: The screen for
verifying reset will appear.
6) Use the joystick to choose "YES", and then press the playback/pause button: Reset will be
executed.
7) After reset, press the MENU button to close the camera setting menu.