Mic Level - Panasonic HDC-SD60K Operating Instructions Manual

[MIC LEVEL]

When recording, the input level from the built-in microphones can be adjusted.
≥ Change the mode to
≥ Switch to Manual Mode. (l 74)
1 Select the menu.
: [RECORD SETUP] # [MIC LEVEL] # desired setting
MENU
[AUTO]:
[SETr ]/[SET]:
2 Touch /
level.
≥ Touch
to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be
reduced. When AGC is disactivated, natural recording
can be performed.
≥ Adjust the microphone input level so that the last 2 bars
of the gain value are not red. (Otherwise, the sound is
distorted.) Select a lower setting for microphone input
level.
3 Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
≥
(Microphone input level meter) appears on the screen.
≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥ You cannot record with the audio completely muted.
68
VQT2M51
.
AGC is activated, and the recording level is adjusted
automatically.
The desired recording level can be set.
to adjust the microphone input
A Left
B Right
C Microphone input level