Mic Level - Panasonic HDC-SDT750 Operating Instructions Manual

[MIC LEVEL]

When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
≥ Change the mode to
≥ Switch to manual mode. (l 83)
1 Select the menu.
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]:
[SETr ]/[SET]:
≥ It is possible to select the setting from the quick menu in manual mode. (l 36) The
microphone level returns to the setting adjusted previously, and it cannot be set from the
quick menu.
2
(When [SETr
Touch /
level.
≥ Touch to activate/disactivate AGC. When AGC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
≥ (Microphone input level meter) appears
on the screen.
≥ When switching to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥ When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the
sound is stereo (2 ch) and only the front-left and front-right input level meters function.
≥ The microphone input level meter shows the largest volume for the microphones.
≥ You cannot record with the audio completely muted.
.
AGC is activated, and the recording level is adjusted
automatically.
The desired recording level can be set.
]/[SET] is selected)
to adjust the microphone input
A Centre
B Front left
C Back left
D Front right
E Back right
F Microphone input level
75
VQT3B52