Shooting Guide; Zoom Mic - Panasonic HDC-SD60K Operating Instructions Manual

[SHOOTING GUIDE]

Message is displayed when this unit is moved rapidly.
≥ Change the mode to
: [RECORD SETUP] #
MENU
[SHOOTING GUIDE] # [ON]
When "CAMERA PANNING IS TOO FAST." appears,
move the unit slowly while recording.
≥ Set to [OFF] to turn off the message indication.
≥ Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
≥ In some recording conditions, messages may not appear.
[WIND NOISE CANCELER]
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥ Change the mode to
≥ Switch to Manual Mode. (l 74)
: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
MENU
≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and
the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.

[ZOOM MIC]

Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ Change the mode to
≥ Switch to Manual Mode. (l 74)
: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU
.
.
.
67
VQT2M51