One Push Reheating - Panasonic NN-CD87 Operating Instruction And Cook Book

Convection/grill/microwave oven
Table of Contents

Advertisement

One Push Reheating

This unique feature 'the Genius'
not necessary to select the power level or cooking time. The built-in sensor measures the humidity of the food
and calculates the cooking time.
When clock mode is displayed, press
the dial to start. To reset oven and
return to clock mode, press Stop/Reset.
Program
Weight
Sensor
Reheat
(fresh
200 g -
pre-cooked
1000 g
chilled meal)
How it works
Once the One Push Reheating has been selected, the
food is heated up. As food begins to get hot, steam is
emitted. When the food reaches a certain temperature
and begins to cook, an even greater amount of
steam is released. The increase in steam emission is
detected by a humidity sensor in the oven. This acts
as a signal for the oven to calculate how much longer
the food needs to cook. The remaining cooking time
will appear in the display window after two beeps.
Whilst the Sensor symbol is still flashing in the display
window the oven door should not be opened. Wait
until the cooking time appears in the window, and
then open the door if required, to stir or turn the food.
Notes:
1. This feature is not suitable for foods that cannot be stirred eg. lasagne / shepherds pie.
2. Do not reheat bread or pastry products (raw or uncooked), or beverages.
3. The oven automatically calculates the reheating time or the remaining reheating time.
4. The door should not be opened before the time appears in the display window.
5. To prevent any mistakes during One Push Reheating ensure that glass tray and the container are dry.
6. The room temperature should not be more than 35 °C and not less than 0 °C.
7. If the oven has previously been used and it is too hot to be used on One Push Reheating, 'HOT' will appear in
the display window. After the 'HOT' disappears, the One Push Reheating may be used. If in a hurry, cook food
manually by selecting the correct cooking mode and cooking time yourself.
F0003CD50KP-O-I_part-0710.indd 28
built-in
sensor allows you to reheat a chilled meal with one push of the dial. It is
Accessories
All foods must be pre-cooked. Foods should be at refrigerator
temperature approx.+ 5 °C. Reheat in microwaveable
container as purchased.
If transferring food to dish, cover with pierced cling film. Press
dial to Start. Stir at beeps. Stir again at end of program and
allow a few minutes standing time.
Large pieces of meat/fish in a thin sauce may require longer
cooking. This program is not suitable for starchy food such as
rice, noodles or potatoes.
- Eng-28 -
Instructions
Adjust to Taste
The One Push Reheating reheats a chilled meal for
average tastes. You are able to adjust the reheating
program to your own taste. After pressing Start, +/-
symbol and flashing bar appears in the display, turn
dial clockwise for more time or anticlockwise for less
time. This operation should be completed within 14
seconds. Default mode is normal.
2019/7/10 9:04:41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nn-cd87ks

Table of Contents