Panasonic NN-CD87 Operating Instruction And Cook Book page 39

Before Requesting Service
PROBLEM
Oven will not turn on.
Oven will not start
cooking.
When the oven is turning
on, there is noise coming
from Glass Tray.
"H97" or "H98" appears in
the display window.
"DEMO MODE PRESS
ANY KEY" or "D" appears
in the display window.
The " " appears in the
display window.
"HOT" appears in the
display window.
If it seems there is a problem with the oven, contact an authorized Service Center.
F0003CD50KP-O-I_part-0710.indd 38
POSSIBLE CAUSE
The oven is not plugged in
securely.
Circuit Breaker or fuse is tripped
or blown.
There is a problem with the outlet.
The door is not closed completely.
Start was not pressed after
programming.
Another program has already been
entered into the oven.
The program has not been entered
correctly.
Stop/Reset button has been
pressed accidentally.
The roller ring and oven bottom
are dirty.
This display indicates a problem
with the microwave generation
system.
The oven is under demonstration
mode.
The Child Lock was activated by
pressing Stop/Reset button
The cavity is overheated.
- Eng-38 -
(continued)
REMEDY
Remove plug from outlet, wait 10
seconds and re-insert.
Contact the specified service center.
Plug another appliance into the outlet
to check if the outlet is working.
Close the oven door securely.
Press dial to Start.
Press Stop/Reset
the previous program and program
again.
Program again according to the
Operating Instructions.
Program oven again.
Clean these parts according to care
of your oven (See next page).
Contact the authorised service
center.
Press Micro Power
Start 4 times and Stop/Reset
button 4 times.
Deactivate Lock by pressing
3 times. Stop/Reset button
Operate again after it cools down.
button to cancel
button once,
3 times.
2019/7/10 9:04:42