Care Of Your Microwave Oven - Panasonic NN-CD87 Operating Instruction And Cook Book

Care of your Microwave Oven

The oven should be cleaned regularly and any food
deposits removed.
To prevent overheating caused by
blocked vents, clean periodically with
damp cloth. To prevent damage to the
operating parts inside the oven, water
should not be allowed to seep into
ventilation openings.
If steam
accumulates inside
or around the
outside of the oven
door, wipe with
a soft cloth. This
may occur when
the microwave
oven is operated
under high humidity
conditions and in
no way indicates
malfunction of the
unit.
Keep the inside of the oven clean.
When food splatters or spilled
liquids adhere to oven walls, wipe
with a damp cloth. Mild detergent
may be used if the oven gets very
dirty. The use of harsh detergent
or abrasives is not recommended.
After using, clean it with a mild
detergent or dishwasher.
Wire Rack Glass Tray
Notes:
1. When using the Grill, Convection or cooking in the Combination mode, some foods may inevitably splatter
grease on to the oven walls. If the oven is not cleaned, occasionally it may start to "smoke" during use.
These marks will be more difficult to clean later.
2. After Grill, Convection or Combination cooking the ceiling and walls of the oven should be cleaned with a soft
cloth squeezed in soapy water. Particular care should be taken to keep the window area clean particularly
after cooking by Grill, Convection or Combination. Stubborn spots inside the oven can be removed by using
a small amount of microwave oven cleaner sprayed onto a soft damp cloth. Wipe onto problem spots, leave
for recommended time and then wipe off. This method can not be used to clean the oven door.
DO NOT SPRAY DIRECTLY INSIDE THE OVEN.
A steam cleaner is not to be used for cleaning.
3. Wipe with a soft cloth when steam accumulates inside or around the outside of the oven door. This may
occur when the microwave oven is operated under high humidity conditions and in no way indicates a
malfunction of the unit or of microwave leakage.
4. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of the glass.
5. Failure to maintain the oven in a clean condition could lead to deterioration of the surface that could
adversely affect the life of the appliance and possibly result in a hazardous situation.
6. When it becomes necessary to replace the oven light, please consult the service center specified by
Panasonic.
F0003CD50KP-O-I_part-0710.indd 39
Turn the oven off and remove the power plug from
the wall socket before cleaning.
Clean the upper heater after
it is completely cold. Wipe
with a soft and damp cloth
carefully to avoid breaking
the heater and hurting your
fingers by the broken heater.
It is occasionally
necessary to remove
the glass tray for
cleaning. Wash
the tray in warm
sudsy water or in a
dishwasher.
Metal Tray
- Eng-39 -
The outside oven surfaces should
be cleaned with a damp cloth. To
prevent damage to the operating
parts inside the oven, water should
not be allowed to seep into the
ventilation openings.
Do not allow the Control Panel
to become wet. Clean with
a soft, damp cloth. Do not
use detergents, abrasives
or spray-on cleaners on the
Control Panel. When cleaning
the Control Panel, leave oven
door open to prevent oven from
accidentally turning on. After
cleaning press Stop/Reset
button to clear display window.
The roller ring and oven cavity floor should be
cleaned regularly to avoid excessive noise.
Simply wipe the bottom surface of the oven
with mild detergent, water or window cleaner
and dry. The roller ring may be washed in mild
sudsy water or dishwasher. Cooking vapors
collect during repeated use but in no way
affect the bottom surface or roller ring wheels.
When removing the roller ring from cavity floor
for cleaning, be sure to replace in the proper
position.
2019/7/10 9:04:42