Samsung ProCpress M408 Series User Manual page 322

Understanding display messages
Message
Paper is empty in all tray. There is no paper in all
Load paper tray.
Paper is empty in MP tray. There is no paper in the
Load paper multi-purpose tray.
Paper is low in [tray type]. Running out of paper in
Load paper the tray.
• Paper Mismatch The paper size specified
• MP Tray Paper
in the printer properties
Mismatch
does not match the
• Tray1 Paper Mismatch
paper you are loading.
• Tray2 Paper Mismatch
• Tray3 Paper Mismatch
• Tray4 Paper Mismatch
[Tray type] cassette is The tray is not securely
pulled out. Insert it latched.
properly
Meaning Suggested solutions
Load paper in the tray
(see "Loading paper in
the tray" on page 68).
Load paper in the multi-
purpose tray (see
"Loading paper in the
tray" on page 68).
Load paper in the tray.
You can select the
option between
Continue or Cancel. If
you select Cancel, the
printing job will stop.
Load the correct paper
in the tray. If you select
Continue, printing job
will continue.
Close the tray until it
locks into place.
Message
• Tray Failure [error There is a problem in the
number]: Pull [tray
tray.
type] out and insert it.
Call for service if the
problem persists
• Tray Failure [error
number]: Check [tray
type] connection and
turn off then on. Call
for service if the
problem persists
11
Network-related messages
Message
This IP address conflicts The network IP address
with that of other system. you have set is being
Check it used by someone else.
802.1x authentication Fail to authenticate.
failed. Please Contact the
System Administrator
Meaning Suggested solutions
Unplug the power cord
and plug it back in. If the
problem persists, call for
service.
Meaning Suggested solutions
Check the IP address
and reset it if necessary.
Check the network
authentication
protocol. If the
problem persists,
contact your network
administrator.
15. Troubleshooting
318