PowerBase 577138 Instruction Manual page 25

Plug replacement
Connect Blue
to N (Neutral)
Outer sleeve
firmly clamped
If you need to replace the fitted plug, then follow the instructions below.
WARNING!
accordance with the following code:
Blue – Neutral
Brown – Live
As the colours of the wire in the mains lead of this apparatus may not
correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The blue wire must be connected to the terminal marked N or coloured black.
The brown wire must be connected to the terminal marked L or coloured red.
WARNING!
terminal of the plug.
Only fit an approved BS 1363 or BS 1363/A plug and correctly rated BS
1362 13 Amp fuse.
If in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be removed, take great care in
disposing of the plug and severed cable; it must be destroyed to prevent it
being accidentally plugged into a power socket.
The wires in the mains lead are coloured in
Never connect live or neutral wires to the earth
Cable grip
25
13AMP fuse
approved to
BS 1362
Brown L (Live)