Operation - PowerBase 577138 Instruction Manual

Operation

Setting the cutting height
WARNING!
mains supply before adjusting the cutting height.
A higher cutting height should generally be selected for the first cut of
the season. When cutting longer grass, cut the grass in 2 or more passes
by lowering the cutting height gradually at each pass. These techniques
will help to avoid over-stressing your grass.
To adjust the cutting height, gently pull the cutting height adjuster (10)
towards you to disengage it from its existing position and move it to the
desired cutting height position (Fig. 8). Ensure it clicks back firmly
into position.
Position
1
2
3
4
5
6
Fig. 8
10
3.
Ensure the power cord is disconnected from the
Cutting Height
20mm
30mm
40mm
50mm
60mm
70mm
1.
2.
19