Radio - Tune; Manual Tuning; Memory Preset; Fm Allocation Setting - Panasonic SC-PM41 Operating Instructions Manual

Radio – Tune

Manual tuning

Manual tuning
Press [TUNER/BAND] to select "FM" or "AM".
1
2 Press [PLAY MODE] to select "MANUAL".
Press [4/REW/ 4] or [3/FF/¢] to select the
3
frequency of the required station.
• " " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [4/REW/4] or [3/FF/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4/REW/4] or [3/FF/¢]
once again.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappear.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
Numeric
buttons

Memory preset

Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting Manual presetting
1 Press [PLAY MODE] to select "MANUAL".
Press [4/REW/ 4] or [3/FF/¢] to tune to the
2
required station.
Press [PROGRAM].
3
Press numeric buttons to select a channel.
4
• The station occupying a channel is erased if another
station is preset in that channel.
Selecting a preset station Selecting a preset station
Press numeric buttons to select the channel.
• For channels 10 to 15 press [h10], then the two digits.
OR
1 Press [PLAY MODE] to select "PRESET".
Press [4/REW/ 4] or [3/FF/¢] to select the
2
channel.

FM allocation setting

FM allocation setting
By main unit only
• This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
Press and hold [TUNER/BAND].
1
• After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2 Continue to hold down [TUNER/BAND].
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After changing the setting, previously preset frequency
will be cleared.
13
RQT8038