Radio - Tune; Manual Tuning; Memory Preset; Am Allocation Setting - Panasonic PM31 - SC Micro System Operating Instructions Manual

Radio – Tune

Manual tuning

Manual tuning
Press [TUNER/BAND] to select "FM" or "AM".
1
Press [PLAY MODE] to select "MANUAL".
2
Press[4/REW/ 4] or [3/FF/¢] to select the
3
frequency of the required station.
• " " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [4/REW/4] or [3/FF/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4/REW/4] or [3/FF/¢]
once again.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappear.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
RDS broadcasting (For Europe) RDS broadcasting (For Europe)
Enable you to display the name of a broadcasting station or
a program type.
Press [DISPLAY] to display:
Station Name (PS)
Frequency display
• RDS displays may not be available if reception is poor.
Program type displays
NEWS VARIED
AFFAIRS POP M
INFO ROCK M
SPORT M.O.R.M
EDUCATE LIGHT M
DRAMA CLASSICS
CULTURE OTHER M
SCIENCE WEATHER
M.O.R.M = "Middle of the road music"
Numeric
buttons
Program Type (PTY)
FINANCE COUNTRY
CHILDREN NATIONAL
SOCIAL A OLDIES
RELIGION FOLK M
PHONE IN DOCUMENT
TRAVEL TEST
LEISURE ALARM
JAZZ

Memory preset

Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
Press [4/REW/ 4] or [3/FF/¢] to tune to the
2
required station.
Press [PROGRAM].
3
4 Press numeric buttons to select a channel.
• The station occupying a channel is erased if another
station is preset in that channel.
Selecting a preset station Selecting a preset station
Press numeric buttons to select the channel.
• For channels 10 to 15 press [h10], then the two digits.
OR
1 Press [PLAY MODE] to select "PRESET".
Press [4/REW/ 4] or [3/FF/¢] to select the
2
channel.

AM allocation setting

AM allocation setting
• This system can also receive AM broadcasts allocated in
10 kHz steps.
To change the step from 9 kHz to 10 kHz
Press and hold [TUNER/BAND].
1
• After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
Continue to hold down [TUNER/BAND].
2
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After changing the setting, previously preset frequency
will be cleared.
11
RQT7928