Cassette Tape - Play And Record; Basic Play; Tps (Tape Program Sensor); Before Recording - Panasonic SC-PM41 Operating Instructions Manual

Cassette tape – Play and record

Basic play

Basic play
Press [OPEN 0] on top of the unit.
1
Insert a cassette.
2
Forward side
3 Close the lid by hand.
3]
4 Press TAPE
[
To play the other side of the cassette, turn the cassette
over.
To
stop tape playback
start one touch play
fast-forward and
rewind

TPS (Tape Program Sensor)

TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
TPS may not function properly with:
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes

Before recording

Before recording
Preparation
Wind up the leader tape so that recording can begin
immediately.
• Use normal position tape.
• High position and metal position tape can be used, but this unit will
not be able to record or erase them correctly.

Recording the radio

Recording the radio
1 Insert the cassette to be recorded on.
Tune to the required station (refer page 13).
2
Press [¶REC/8] to start recording.
3
12
RQT8038
Insert inside the
guides
to start play.
Action
Press [CLEAR 7].
Press [TAPE 3] when the system is OFF
with the cassette loaded.
Press [4/REW/4 ] or [3/FF/¢] in the
stop mode.

Recording CDs

Recording CDs
1 Insert the cassette to be recorded on.
Forward side
Press [CD 6] and then [STOP 7, –DEMO].
2
3 Press [0 OPEN/CLOSE] to insert the CD.
Press again to close.
4 Press [PLAY MODE] to select your desired mode
(refer page 7).
5 Press [¶REC/8] to start recording.
Recording programmed tracks Recording programmed tracks
1 Program the tracks you want (refer page 9).
Press [¶REC/8] to start recording.
2

Other basic operations

Other basic operations
To Action
erase a recorded 1) Insert the cassette to be recorded on.
2) Press [TAPE 3] and then [CLEAR 7].
sound
3) Press [¶REC/8].
Press [CLEAR 7].
stop recording
stop recording 1) Press [¶REC/8].
temporarily 2) Press again to resume recording.
to record on the Turn the cassette over and press
other side of the [¶REC/8].
tape
Erasure prevention Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side B Tab for side A
Top of the unit
Cassette lid
Insert inside the
guides
To re-record
Normal tape
Adhesive tape