Figure 53: Select Images/Burst For Report Window; Figure 54: Video Panel - Image Selection - LABORIE NXT Series Owner's Manual

Synergy Software
Click the Select Images icon to launch the Select Images/Burst for
Report window. Videos captured will be deconstructed as images in the Image
Burst tabs and all single images captured will be found under the Images tab.
Refer to Figure 53 below.

Figure 53: Select Images/Burst for Report Window

Select the images required for the report from each tab. Press the close icon to
exit the window. Images selected for inclusion in the report will display a blue
circle in the upper right corner of the thumbnail. The number of images selected
from each image burst tab will be displayed within the blue circle on the video
thumbnail.
Figure 54: Video Panel – Image Selection
To incorporate selected images into the Report, access the Report content drop
down menu in the Report. Check the Video Images option
and Apply Changes to add this feature to the report.
NXT Owner's Manual NXT-UM01, MAN2010 64