Canon pmn Advanced User's Manual page 88

Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
AF-assist Beam is set to
[Off].
Subject is out of focal range. Shoot with the subject at the
The subject is hard to focus
on.
Subject in recorded image is too dark.
Insufficient light for shooting. Set the flash to
The subject is
underexposed because the
surroundings are too bright.
Subject is too far away for
flash to reach.
Subject in recorded image is too bright, or
image flashes white.
Subject is too close, making
the flash too strong.
86
Confirm the procedures in
" appears" (p. 84).
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to
activate it (p. 21). Take care not to
obstruct the AF-assist Beam with
your hand when used.
correct focusing distance (p. 112).
Use the focus lock, AF lock or
manual focus to shoot (p. 45).
(Basic Guide p. 12).
Set the exposure compensation to
a positive (+) setting (p. 49).
Use the spot metering functions
(p. 48).
Shoot within correct flash range of
the subject when using the built-in
flash (p. 113).
Raise the ISO speed and then
shoot (p. 53).
Shoot within correct flash range of
the subject when using the built-in
flash (p. 113).
Turn [On] the Safety FE (p. 56).
(Flash on)