Canon pmn Advanced User's Manual page 53

1
FUNC. Menu
See Menus and Settings (p. 18).
* Default setting.
2
Aim the camera at a piece of white
paper or cloth and press
If you are viewing it with the LCD monitor, ensure that
the center frame is completely filled with the white
image. If you are using the optical viewfinder, ensure
that the entire field is filled. However, the center frame
will not appear when the digital zoom is being used, or
when
You are recommended to set the shooting mode to
and the exposure compensation setting to [±0] before
setting a custom white balance.
The correct white balance may not be obtained when
the exposure setting is incorrect (image appears
completely black or white).
Shoot with the same settings as when reading the
white balance data. If the settings differ, the optimal
white balance may not be set.
In particular, the following should not be changed.
- ISO Speed
- Flash
Setting the flash to on or off is recommended. If the
flash fires when reading the white balance data with
the flash set to
use the flash when you shoot.
Since the white balance data cannot be read in Stitch
Assist mode, preset the white balance in another
shooting mode beforehand.
* (Auto)
is displayed.
(Auto), make sure that you also
(Custom).
.
51