Manually Setting The Shutter Speed And Aperture - Canon pmn Advanced User's Manual

Manually Setting the Shutter
Speed and Aperture
Shooting Mode
You can manually set the shutter speed and aperture to shoot images.
When you press the shutter button halfway, the difference
between the standard exposure* and the selected exposure
appears on the LCD monitor. If the difference is more than ±2
stops, "–2" or "+2" appears in red.
* Standard exposure levels are calculated by measuring light according to
the currently selected metering mode.
If you wish to change the exposure, select shutter speed or
aperture using the
the
If the zoom is adjusted after these values are set, the aperture
value may change in accordance with the zoom position
(p. 40).
The LCD monitor's brightness matches the selected shutter
speed and aperture value.
When you select a fast shutter speed or shoot a subject in a
dark place, the image will always be bright if the flash is set
to
42
or button.
(Flash on).
button, then adjust the value using