Using The Digital Zoom/Digital Tele-Converter - Canon pmn Advanced User's Manual

Using the Digital Zoom/Digital Tele-Converter

Shooting Mode
You can combine digital zoom with optical zoom when shooting.
The available shooting characteristics and focal lengths (35mm film
equivalent) are as follows:
Selection Focal Length
Standard 35 – 560 mm
Off 35 – 140 mm
1.5x 52.5 – 210 mm
1.9x 66.5 – 266 mm
The digital zoom cannot be used when the LCD monitor is
turned off.
The digital zoom cannot be used in
or (Widescreen) modes.
1
(Rec.) Menu
[Off]/[1.5x]/[1.9x].
* Default setting.
When using [Standard]:
See Shooting with the Digital Zoom
(p. 30).
When using [1.5x], [1.9x]:
See Shooting with the Digital Tele-Converter (p. 30)
* Digital tele-converter cannot be set.
Enables shooting at zoom factors of
up to 16x with digital and optical
zoom combined. In
is only available in Standard
mode
Enables shooting without digital
zoom.
Digital zoom is fixed at the selected
zoom factor, and the focal length
shifts to maximum telephoto. This
enables a faster shutter speed and
less chance of camera shake than a
shot taken at the same angle of view
with [Standard] or [Off].
[Digital Zoom]
See Menus and Settings (p. 19).
*
Shooting Characteristics
.
or
[Standard]*/
, this setting
(Postcard),
29