Using The Lenses (Sold Separately) - Canon pmn Advanced User's Manual

Using the Lenses (Sold Separately)

The camera supports use of the separately sold Wide Converter
WC-DC52, Tele-converter TC-DC52A and Close-up lens 250D
(52mm). In order to attach these lenses, you also need to use the
separately sold Conversion Lens Adapter LA-DC52G.
When attaching the wide converter, tele-converter or
close-up lens be sure to screw it on securely. If they come
loose, they may fall from the lens adapter, posing risk of
injury from shattered glass.
Never look into the sun or into strong light through the wide
converter, tele-converter or close-up lens as this can result
in blindness or impairment of vision.
If you use the flash when shooting with these attachments,
the outer area of the recorded image (especially lower right
corner) will come out relatively dark.
When using the tele-converter, please set the focal length
to the telephoto end. At other zoom settings, the image will
appear as if its corners have been cut off.
When using the wide converter, please set the camera to
the wide angle end.
If you use the viewfinder for shooting, a portion of the view
will be blocked by these attachments. Please use the LCD
monitor.
Wide Converter WC-DC52
Use this converter for taking wide-angle shots. The wide converter
changes the focal length of the camera body's lens by a factor of
0.7x (the thread diameter is 58 mm).
Tele-converter TC-DC52A
This lens is used for taking telephoto shots. The lens changes the
focal length of the camera body's lens by a factor of 1.75x (the
thread diameter is 52 mm).
It is not possible to attach a lens hood or filter to the wide
converter or tele-converter.
103