Table of Contents
Advertisement
12
www.aeg.com
recommendations refer to "Energy
Efficiency" chapter, Energy Saving.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Time of Day
Minute Minder
7.2 How to set: Time of day
After the first connection to the mains,
wait until the display shows: hr, 12:00.
12 - flashes.
Step 1
Step 2
Step 3
Step 4
- press repeatedly to change the time of day.
7.3 How to set function:
Duration
Step 1
Duration
End Time
Time Delay
Turn the knob for the temperature to set the hour.
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
Turn the knob for the temperature to set the minutes.
- press to confirm.
The display shows the set time.
Set a heating function.
Application
To show or change the time of day. You can change the
time of day only when the oven is off.
To set the length of cooking. Use only when a heating
function is set.
To set the oven turn-off time. Use only when a heating
function is set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on
the operation of the oven.
Minute Minder - can be set at any time, also if the oven
is off.
- flashes in the display.
Advertisement
Table of Contents
