Qomo HiteVision QRF 700 User Manual page 144

1. Plug the main receiver into a PC.
2. Set the QClick software to the Receiving Session Data mode. Refer to Part 2 Software,
2.3.2 Receive Session for detailed instruction.
3. Select the Offsite mode in the instructor keypad. Then select the function UploadSession.
4. The LCD screen will display a list of available sessions.
5. Select the desired session and press the Menu/OK Key
6. The LCD will display the selected information. Click the Menu/OK Key
"Return" Right Soft Key
data will not be purged. To purge the session data, go to the function Session List.
3.2.2.5.4 Class List:
The Class List function provides the list of classes which have been downloaded into the instructor
keypad as well as the selection of classes you desire to delete from the keypad memory in order to
make room for downloading new classes. The maximum number of classes the instructor keypad
can store is 8. To view and delete a class from the class list, follow these steps:
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
to quit uploading. After successfully uploading, the session
www.qomo.com
.
to confirm or click
144