Table of Contents
Advertisement
software.
To set a Student ID, follow these steps:
1. Under the NoHost screen, press the "Menu Key/OK"
2. Press Down Key
3. Under the "SetStudentID" screen, enter a valid Student ID and then press the "Menu
Key/OK"
To set a username, follow these steps:
1. Under the NoHost screen, press the "Menu/OK" key
2. Press Down Key
3. Under the "SetUserName" screen, enter a valid user name and press the "Menu/OK" key
to save.
(2)
Login to a class:
To login to a class, follow these steps:
Under the NoHost screen, select the "Login" right soft key
OR
1.
Under the NoHost screen, press the "Menu/OK" key
to enter the main menu.
2.
Select "Login" to login into your class.
Note: The clicker will detect the active class in the closest proximity.
(3)
Set Channel:
If the clicker does not automatically detect the right class you would like to attend, you may manually
set your clicker communication channel to the channel number that the class use. The class channel
number is the main receiver channel number set.
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
or Right Key
to save it. The Student ID can be the combination of numeric and alpha.
or Right Key
www.qomo.com
to enter into the main menu.
to select SET STUDENT ID menu.
to enter into the main menu.
to select Set User Name menu.
to directly login to your class.
or "menu" "Left Soft Key"
117
Advertisement
Table of Contents
